This six-stick comb-back chair with a narrow comb is the chair I built for the first issue of The Stick Chair Journal. I spent about a year gradually changing details on my chairs to arrive at this design, which features a four-piece arm with mitered arms.
This chair, which is built using Pennsylvania black cherry, is set up for dining or relaxing. The back leans 17° off the seat, and the seat is tilted 5°, so the back is a generous 22° off the floor. The seat is 17” above the floor, which is a good height for most sitters. Overall, the chair is 39” tall, 28” wide, 23” deep and weighs 16-1/2 pounds.
The hands of the chair feature through-tenons that have been shaped pyramidal. The stretchers also use through-tenons, which add strength to the chair’s undercarriage. Also worth noting: The shoe is attached with both glue and two blacksmith-made roseheads – a tip of the hat to the iron hardware that sometimes holds together old examples of vernacular chairs.
Like all of my chairs, this one shows texture and evidence of the tools used to make it. There are subtle rasp marks in places. All the angles of the chair’s legs, stretchers and sticks are sighted by eye and without jigs. So there are small variations – some might say imperfections. I’ve never had complaints from customers, but I like to make it clear this is not like a factory-made chair.
The joints are assembled with hide glue and oak wedges, so the joints are strong but can be easily repaired by future generations. The finish is a home-cooked linseed oil/wax finish that has no dangerous solvents. The finish offers low protection, but it is easy to repair by the owner with no special skills or tools.
Purchasing the Chair
This chair is being sold via silent auction. (I’m sorry but the chair cannot be shipped outside the U.S.) If you wish to buy the chair, send an email to lapdrawing@lostartpress.com before 3 p.m. (Eastern) on Thursday, May 26. In the email please use the subject line “Chair Sale” and include your:
First name and last name
Bid
U.S. shipping address
Daytime phone number (this is for the trucking quote only). You will not receive a phone call or get put on a mailing list. I really dislike that stuff.
Shipping options: You are welcome to pick up the chair here in Covington, Ky., and also pick up a free yardstick and pencil. I am happy to deliver the chair personally for free within 100 miles of Cincinnati, Ohio. Or we can ship it to you via LTL. The cost varies (especially these days), but it is usually between $200 and $300.
Jögge Sundqvist works with hand tools in the self-sufficient Scandinavian slöjd tradition, making stools, chairs, cupboards, knives, spoons and sculptures painted with oil color. “Not uncrafty” is his motto. He’s also a teacher, performer, musician and author of several books. An English translation of his book “Slöjd in Wood” is available from Lost Art Press, and an English translation of his latest book, “Karvsnitt,” is forthcoming. Jögge’s father, Wille Sundqvist (1925-2018), was a prominent figure in the green woodworking movement.
“There was never a word about how I was going to be the one to take care of the tradition,” Jögge says. “Never. My father, I think he just wanted to share the joy, how to form things in a beautiful way, how easy it is to use an axe and use a knife. He was a good teacher and he was very eager to teach. But sometimes, when I was younger, once in a while I’d say, ‘Stop! I want to try myself! Don’t tell me everything!’ He was a trained furniture maker from Carl Malmsten’s Verkstadsskola, so he had his ways. But despite that, he was encouraging.”
Jögge grew up in Luleå, Sweden, where at that time his father was teaching kids in slöjd.
“In Sweden, slöjd is still something that every student has to learn,” Jögge says. “They have to learn how to use materials such as wood and textiles, and the techniques that go with it. Today I wouldn’t call it slöjd because I have another definition of it. But still, it’s a practical way to teach children how to use their hands.”
Otto Salomon (1849-1907), was an advocate of educational slöjd. “He wrote about how important it was for children to learn practical things, to read a drawing with measurements and stuff like that, especially farmer kids and working kids,” Jögge says. “They needed to have that knowledge to be able to be workers in the industrial revolution.”
Jögge has fond memories of his childhood in Luleå, following his father to the school’s workshops, helping him make things and making his own things.
“We had fun,” he says. “And he was eager to do his own things besides teaching and he helped us do our things too. And I loved that. For one thing, it gave me the confidence that everything could be made by hand.”
Around this time Malmsten, who founded two schools, arranged a workshop with teachers in Luleå where they were tasked to create children’s toys made out of wood.
“It was meant to be a fun workshop where they invented a lot of ideas around woodwork and children’s toys,” Jögge says. “Years ago I saw some slides when I’m 4 years old and I’m sitting on a crocodile on wheels and it has four pieces that are tied together with yarn so it can roll and sway on the ground a little. I’m sitting on it and it’s very roughly axed and carved with gouges and painted with oil colors and kind of sparkling – vivid colors – and I just loved that. And when I saw this picture, something inside me said, ‘Yeah. This must have been an early triggering point there.’ Because I am very attached to folk art and colors. I love powerful designs and rough carved surfaces. That’s why I am into slöjd much more than furniture work. I think it was somewhere there casting an eye over my shoulder – the inspiration started there for me.”
From the Back of a Dragon to a First Knife Jögge’s childhood was filled with art and slöjd. He remembers his father taking him to a film about Picasso at the age of 10. And he recognizes that the environments he lived in were special.
“My mother was very, very skilled in weaving, felting and nålbindning, which is an old knitting technique,” Jögge says.
His mother was also brilliant with color. Jögge remembers dining room tables filled with color samples and his mother eyeing them all day long, observing them in different light for days on end just to pick the perfect shade of red. It’s something Jögge has found himself doing, mixing and fixing paint for hours, trying to settle on the ideal shade.
“She and my father adapted the Carl Malmsten way of having a home, with handmade things, crafted things,” Jögge says. “The things were fancy and well done, but it wasn’t that we were rich or wealthy. But they were very well designed and carefully made. We lived in a workers’ block, very close to the iron and steel mill in Luleå, not very fancy at all. We had three rooms and a kitchen.”
Jögge and one of his two brothers shared a double-stacked bed in a room that also served as their father’s workshop.
“In their mind, a home should be something very comfortable, functional and cozy and crafted,” he says. “So my father made the shelves and the beds but it was my mother who was the one who had the overall look for making it a home. My father was very oriented in objects but my mother saw how everything should fit together, from the carpets to the windows.”
Wille Sundqvist, Jögge’s father, grew up in a small village outside Bjurholm, with eight siblings. Wille’s father was a farmer who made a special kind of chair from that part of the country and brooms with a natural bent curve and horsetails on the back. On the weekends Wille and his family went to town and sold chairs and brooms for extra income.
“And that is exactly the definition of handicraft in Swedish,” Jögge says. “Because we have the word ‘slöjd’ and then we have the word ‘hemslöjd,’ which is ‘home craft.’ And ‘Hemslöjden’ is the craft movement in Sweden.”
Hemslöjd, Jögge says, is basically a side business for farmers. “When the industrial revolution started you needed money,” he says. “If you were farming you were self-sufficient and you didn’t have any money so you had to make some things in the tradition that you knew. So they made spoons, brooms and baskets and chairs and all kinds of objects in different parts of Sweden and sold it in the cities and they’d buy a steel bucket, for example, because you couldn’t make one yourself but it was obviously much better than a wooden bucket.”
When Jögge was 10 the family moved to Vilhelmina, and his father began working as a craft consultant.
“He was one of three craft consultants in Sweden working for hard materials, wood and metal,” Jögge says. “Before that they had craft consultants for textile work but never before for harder material. So he was kind of a pioneer there, working for the whole county, trying to help mainly farmers who also had a hemslöjd as a side income.”
The craft movement flourished in Sweden in the 1970s and ’80s. As a craft consultant, paid by the government, Wille helped thousands of small farmers get loans from the state, create business plans, design workshops and create sophisticated drawings of everything, from candle holders to cups to butter knives.
Ten-year-old Jögge loved the move to Vilhelmina. “We came from an apartment to a house,” he says. It was 1969 and the town they moved to had about 4,000 people, so everybody knew everybody. As a teenager, Jögge started playing instruments, including the guitar, and he started a band. His life revolved around rock ‘n’ roll and friends.
Jögge’s father was patient. And when Jögge was 15 years old, he asked his father, “Can you show me how to make a knife?”
His father was quietly thrilled.
Wille taught Jögge the importance of finding a good blade, testing several blades out on reindeer antler. The knife was made in parts from reindeer antler and masur, a type of birch, so there’s a special pattern to it. His father showed him how to inlay the silver and sew the sheath.
“It’s great,” Jögge says, holding it while talking. “I use it very, very much. It’s still a favorite.”
The Old Ways of Doing Things
Jögge moved to Umeå in 1978 where he had his own apartment and started to work for the railroad, at Umeå Central Station.
“I started at the tracks,” Jögge says. “When you’re taking apart a train, someone has to stand in between the cars. When the train was disjointed, the cars were pushed off to another train set. When they came in at a speed of up to 20 mph, you had put on the hook when it bumped into the trainset, to put the train together. It’s a very dangerous job. You have to be quick, and you can die if you come between the bumpers.”
Jögge also had a small workshop in a big wardrobe, 3 meters x 2 meters (about 10′ x 6′). Instead of using it for clothes, he built a workbench where he made knives and did some commission work too. In 1982, a friend convinced him to take two years and attend Vindeln, a folk school that specialized in slöjd.
“That totally changed my whole perspective, because we were a group of students who were all dedicated to work in the traditional way,” Jögge says. “We were finding the old ways of doing things by riving wood, splitting wood, following the fiber, using tradition as a woodworking tool. At the time, a lot of people trained in woodworking more like a fine arts craft. But we were dedicated to the old traditional craft, from the 1700s to the 1800s. We had a lot of discussions defining things: Who are we? Why are we doing these things? We had all-night discussions, even arguments. That was the sense of time, and formative to who I am. Beth Moen was in the class above me, and Ramon Persson was another heavy influence. And we were trained in design too – painting, freehand drawing, technical drawing and so on.
“As I look upon it now, I found a way of exploring the tradition from a personal point of view, not my father’s point of view. Because I knew how to make a spoon. I knew how to make a knife. That was pretty common for me. But all of a sudden I had people in my age who were dedicated to what they did and I was able to form my own world which wasn’t my father’s world so I finally had my own choices to make.
“I remember I had been there for a week and I called my dad and I said, ‘Oh, I forgot to tell you, I’m at this school.’ And he said, ‘Wow!’ And he was free-minded by that time. He said, ‘When you’re 18, go out in the world and do whatever you want to do. I care about you but you should feel free to do whatever you want to do. You have to form your own life.’”
By this time Jögge’s parents had divorced, and his mother had moved to Vindeln as well. Jögge lived in her house during the week, and they invited classmates for weekends at his mother’s house, where they had “many wonderful parties and laughs.” His mother was very social and loved young people, Jögge says.
While attending Vindeln Jögge continued to work for the railroad on the weekends, and once done with school he went back to the railroad full-time. Later he worked as a train dispatcher with an office at the station and a platform outside where he’d waved to the train drivers, indicating if it was OK to go or not. In 1985, he asked to work half-time. By then he had his workshop, was playing in a popular rock ‘n’ roll band and owned a record company, Jakaranda Records, recording local bands and putting out records for them.
Traditional Craft & Rock ‘n’Roll
Jögge’s first band was Rockvattnä, named after a village outside of Vilhelmina, which roughly translates to “rocking water.” When Jögge moved to Umeå, he formed another band called Favoritorkestern and later Kapten Nemo.
“We were more of a serious Swedish pop band, heavily influenced by the Beatles, the Who, bands like that, but lyrics in Swedish. Very ’80s like. We were playing all the time. Stockholm too.”
The band had two leads. Jögge played guitar and sang, and they had a bass player who also sang. Both Jögge and the bass player wrote all the songs. They made a maxi single with four songs and a long-playing record. They were on the radio. For two to three years, around 1986 and 1987, they were the biggest band in Umeå.
“It was real fun,” Jögge says. “We had a good time there. In 1992 I finally released a solo record, Människa.”
He continued his traditional craft work, and the combination of rock ‘n’ roll and traditional craft fulfilled him.
“Doing traditional craft on one hand was lovely because the rock ‘n’ roll world is a very on-the-surface world,” he says. “It’s fun! But when I got fed up with the superficial rock ‘n’ roll world I could do craft and make things that lasted forever. But also, playing a gig that exists for a moment in time is exciting, the power and energy which comes out of it. So I had this kind of dialectic relationship with the fluidity of craft and rock ‘n’ roll. And I liked that combination, the interaction between modern life and tradition. I think I am that type of person who wants contrast and a little conflict in order to have balance in my life.”
Although Jögge no longer plays, he’s still, as he says, “totally addicted to good music.” He has more than 5,000 songs on his Spotify playlist, and he always plays music while working.
The rhythm of the music must match the rhythm of his work. When that equivalency occurs, he feels more power while throwing an axe, he says, and experiences more feeling while doing it.
“But when I carved patterns on knives, I tried to play rock ‘n’ roll but it didn’t work,” he says. “So I tried to look for more repetitive music which gave me some kind of fluency while working. And I found Steve Reich. He’s arty, modern, non-vocal, very repetitive. I found music with small patterns, like Philip Glass. And actually, it was Laurie Anderson who brought me there, talking about these people, Talking Heads was very repetitive but still a kind of ambiance. And I did much better working with that kind of music for patterns and chip carving. So a very profound insight was when I realized it must be a connection between music and body and working.”
In 1994, Jögge set up a big multimedia rock concert called Rockhuvud. He acted as producer, project manager, composer and musician. The performance featured a rock ‘n’ roll band, Komeda, and two craftspeople, Beth Moen and Tryggve Persson, live on stage. They toured throughout Sweden, 40 concerts in all.
“All the musicians and the craftspeople worked in rhythm, instructed by a choreographer, through this whole concert,” Jögge says. “So it has been a real thread in my work – the body, the rhythm, and the work. It’s hard to explain, but the performance was a way of expressing the power of slöjd, both the physical character of the work and the beauty of the shapes and colors.”
Here he quotes the beat poet Jack Kerouac: “Because I am Beat, I believe in Beatitude and that God so loved the world He gave His only begotten Son to it.”
“I think it has to do with something about flow,” he says. “One of my favorite moments in the workshop is working pretty hard and sweating all over – when form comes naturally and you don’t even think about it. It just comes there, from the tool, from the material, from your skill. It’s a rhythm, a kind of instinct that is created in that moment. And after that you just look at it and say, ‘What have I done?’ I talked with Del Stubbs about this, about the dancing of the hands. Sometimes you can just look at your hands, and they just work themselves. You don’t even think about it. They just work.
“This is still something that’s true to me. I believe real craft comes from a deeper interaction with your mind and body, obviously with a long knowledge of tradition, materials and technical skill with the tools. When all parts connect and work together, real slöjd comes from my hands.”
Jögge says he realizes now the importance of having one leg in traditional craft and one leg in rock ‘n’ roll, and that both legs contribute to his body functioning in a way that allows the magic of Surolle. (And that’s a story still to come, in part two.)
The Stick Chair Journal is in the final stages of production and will be released in Fall 2022. We’ve added it to the store so that you can sign up for to be notified when it is available. To do that, visit the store page and click on “Notify Me.” (Note that on the front page of the store, there’s a banner on the Journal (and other items with zero units in stock) that reads “sold out.” Underneath is the “notify me” banner.)
When it’s available (again, not until Fall), there will be two ways to purchase it:
1. Order the softcover version and you will also receive two PDFs: a PDF of the journal and a second PDF of the patterns for the chair in this issue at checkout.
2. Order the PDF of the Journal and you will receive two PDFs: a PDF of the journal and a second PDF of the patterns for the chair in this issue at checkout.
We plan to print 4,000 copies – and when the press run sells out, that’s it (though the PDF will remain available). Unlike with our books, we do not plan to reprint to keep the physical item in stock.
The Stick Chair Journal, will be an annual publication that aims to expand the universe of all things stick chair: More history. More plans. More techniques. Reviews of tools. And Big Thoughts. It is a supplement to “The Stick Chair Book.“
In Issue No. 1, you’ll find:
• A Lousy Way to Run a Railroad: An explanation of what this journal is all about.
• How & Why to Make Hexagonal Parts: An exploration of hexagonal chair parts. How to make them both by hand and with some machine assistance. Plus the design considerations for their visual and actual mass.
• True Grit: A Dirty Job, But Not a Dirty Word: Abrasives in woodworking predate planes and other edged tools. There’s no shame – and there is plenty of historical precedent – in sandpaper.
• The Fat Boy Scriber: An ingenious tool for marking leg lengths and, with an easy modification, marking curves.
• Chairmaking on the Cheap(er): You don’t need expensive tools; here are less expensive and accurate alternatives for cutting tenons, fitting combs and locking in your important angles.
• Comb-back with an Improved Arm: Complete plans and construction information for a new six-stick comb-back chair, with a four-piece, mitered-end armbow and a thin, cut-away profile on the hands.
• Stick Chairs in the Wylde: The road to becoming a good chairmaker is looking deeply at beautiful chairs. We explore a chair that has launched the chairmaking careers of many makers.
• A Vampire Chair: A fabled chair in Tennessee was broken apart to murder its owner. Now that it has been repaired, it’s acting odd.
Thanks to the many people who helped cut parts for and knock together this wee Nicholson bench at our last open house, by the end of the day on March 26 there wasn’t much left for Chris and me to do to get it ready for the opening of the Cincinnati Museum Center’s “Made in Cincinnati.”
Our volunteers (again, thank you!) cut the angles on the front and back aprons, nailed the bench together and drilled all the holdfast holes. All that remained was to install a planing stop, and make and attach a crochet.
Today (yes, two months later), I did one of those things; tomorrow (or maybe Monday), I’ll make the crochet. When Chris returns from his Great Plains adventure (he’s in Omaha right now to fulfill a teaching promise made long ago), we’ll decide how we want to install that. (I’m leaning toward nails, because I don’t know where to find appropriate bolts – ones that were made in the first half of the 19th century, or at least look as if they were.)
“Made in Cincinnati,” scheduled to open July 1, includes a “made by hand section” – an educational display about important 19th-century Cincinnati craftsman, one of whom was Henry Boyd. Boyd was a formerly enslaved person who bought his freedom, and later owned a furniture making business in downtown Cincinnati. On exhibit will be one of his “swelled railed bedsteads” and a re-creation of his shop space, which is where this Nicholson-style workbench will end up. (Also, we have been working on a book on Boyd for the last couple years – we’ll be able to tell you more about that in autumn).
The only annoying thing about installing the planing stop was that because I decided to put it in line with the holes in the top (though one doesn’t need to), I had to chop right through a large, sticky sap pocket, so the shoulder isn’t a clean as I would like…and my chisel is a lot less clean than I would like (or at least it was – paint thinner and my woobie have taken care of it). After laying out the mortise location on the top and bottom, I drilled out most of the waste, then used a 2″ chisel to pare back to my layout lines, working in from both sides. (Thank you to Katherine the Wax Princess for helping me to flip it over…and to Archimedes for teaching me how to flip it back.)
So now, it’s down to the crochet – but no hurry; this isn’t getting picked up until June. (What? That’s only 11 days away?!)
When we sent our first book, “The Art of Joinery,” to press 15 years ago, I was teaching a class at Kelly Mehler’s School of Woodworking in Kentucky and got a phone call from the pre-press shop.
“The interior folio looks fine,” the voice said. “But what are you going to put on the cover?”
I stood there, dumbfounded. John and I hadn’t even thought about the cover.
So on my lunch break I grabbed my laptop and whipped up the cover above in about 15 minutes. I laid out the text and thought: Should we put some image on the cover? I quickly scanned through the images in the book and – with about two seconds of thought – threw the dividers on there. I sent the cover to pre-press and ran back to finish the class.
And that is how we got our company’s logo – dividers.
Believe it or not, it took a while for us to catch on that our books needed cover images. When I worked in corporate publishing, the cover and title were things that were settled and discussed by people way above my pay grade. So it wasn’t something I thought much about.
So “The Essential Woodworker” went through the same oh-crap-I-forgot-the-cover process as “The Art of Joinery.” It really wasn’t until “The Anarchist’s Tool Chest” that my head really began thinking much about our books’ covers’.
These days I spend more time working on the cover – though we don’t fret over the marketing aspect of it. Like all aspects of our books, the cover is a joint decision between the author and me. So many times the cover is remarkably unmarketable. Which I love.
Now that we have Megan on board as the full-time editor, I have more time to breathe, think and look beyond the flaming crisis of the day. So this week I spent some time redesigning the cover of “The Essential Woodworker” by Robert Wearing, which is one of our core books. We are in the process of reprinting it for its 11th printing, and I don’t know when the new cover will appear. Likely this fall. And I don’t know if the cover cloth will be blue. Cloth shortages are wreaking havoc with our titles. (Have you seen the new cloth on “With the Grain?” I like it, but it wasn’t our first choice – or our eighth.)