If you are in the market for live-edge slabs that are dry and ready to go, read on.
The tree service I use outside Cincinnati has seven beautiful walnut slabs available that they have cut, dried in a vacuum kiln and are stacked and ready to go. I got to inspect the slabs last week during a visit and they are sweet. I didn’t have my moisture meter with me, but they felt dry and ready to use.
Here are some details:
They have two slabs that measure 3” thick and 12’2” long. These are 45” wide (!!) at the crotch end and 27” to 34” wide on the bole.
They have four slabs that measure 3” thick and 12’2” long. These are 47” wide at the crotch end and 34” wide on the bole.
They have one slab with bark on one face that is 136” long at the crotch end and 20” at the bole end. The thickness varies because of the bark surface, but the middle bit is almost 6” thick.
I’m listing these here as a favor to the seller and you. I don’t get a commission and have no interest in the deal.
This was one impressive walnut tree, and I’m happy these guys were able to save it from the chipper so it can live on.
For information on pricing and availability, contact Jay Butcher at 513-616-8873 (voice or text) or via email.
James McConnell, of The Daily Skep, will teach a weekend class on making a fore plane July 21-22 at the storefront in Covington, Ky. Registration opens at 9 a.m. Monday, Feb. 12.
Just like the other classes at Lost Art Press, it is limited to six students, and proceeds go directly to the instructor; they are not a money-making enterprise for Christopher Schwarz or Lost Art Press. He’s let those of us who are teaching use the space for free (he’ll likely edit this out, but: Chris is incredibly generous and kind) as a way to help build and get the word out on the local woodworking community in Covington. (And to help feed the cats/children/chameleons of the instructors.)
Here are the details:
Build a Traditionally Styled Laminated Fore Plane with James McConnell July 21-22, 2018 Cost: $250, plus a $115 materials fee for the wood & iron
Build your own a traditionally styled wooden fore plane in a weekend with Jim McConnell. Using simple laminated construction, this wedge-and-pin-style plane works, looks and feels like a traditional fore plane, but it requires no specialized planemaking tools. This is a great way to get into the world of wooden handplanes – and the skills you learn in this class can be applied across the board to build planes of other sizes as well. We’ll focus on getting the bed angles right and fitting each plane to the user, so the plane you take home will be as individual as you are.
Of course, you realize that the feature that makes this work awkward is the fact that the moulding which forms the pediment slopes upwards towards the middle. It necessitates a different section from that at the sides, and introduces an interesting problem in mitreing. The pediments of doorways, windows, and mantelpieces often had this feature.
A little reflection will show you that the moulding which runs around the side of the cabinet, the return mould as it is called, must necessarily be different in section from the sloping mould at the front (raking mould, to give it its technical title). Apart from anything else, the top surface cannot be square but must obviously slope to agree with the raking mould, and its top square member must be vertical. The whole contour, however, is quite different because it would otherwise be impossible to make the members meet on a true mitre line. These points are at once clear from a glance at Fig. 2 (A and B).
Before proceeding farther, it will be as well to explain that so far as the centres of these broken pediments* are concerned there are two distinct methods that can be employed. In the one the same section is used for the return as the raking mould, so that the square members of the moulding which would normally be vertical lean over at right angles with the raking mould. The pediment in Fig. 1 is of this kind; also that shown at C in Fig. 2. In the second method the section of the return is different, and is arranged so that all normally vertical members remain vertical as at D, Fig. 2. This latter method naturally involves considerably more work but has a better appearance. Both methods were used in old woodwork.
To return to the outer corners, the first step is to fix the contour of the return moulding since this is the one which is seen the more when the cabinet is viewed from the front. Draw in this as shown at A, Fig. 2, and along the length of the raking mould draw in any convenient number of parallel lines, a, b, c, d, e. Where these cross the line of the moulding erect the perpendicular lines 1-7. From the point x draw a horizontal line. With centre x draw in the series of semicircles to strike the top line of the raking moulding, and then continue them right across the latter in straight lines at right angles with it. The points at which they cut the lines a-e are points marking the correct section of the raking mould, and it is only necessary to sketch in a curve which will join them (see B). The same principle is followed in marking the centre return D, but, instead of drawing the semi-circles, the vertical lines 1-7 are drawn in the same spacing as at A (the reverse way round, of course).
Having worked the sections the problem arises of finding and cutting the mitre. This is explained in Fig. 3. The return mould presents no difficulty, and it is usual to cut and fit this first. It is just cut in the mitre box using the 45 deg. cut. Note that the back of the moulding is kept flat up against the side of the mitre box, the sloping top edge being ignored. Now for the raking mould. Square a line across the top edge far enough from the end to allow for the mitre, and from it mark the distance T R along the outer edge. This T R distance, of course, is the width of the return moulding measured square across the sloping top edge. This enables the top mitre line to be drawn in. The depth line is naturally vertical when the raking mould is in position. You can therefore set the adjustable bevel to the angle indicated at U and mark the moulding accordingly.
Worked and cut in this way the mouldings should fit perfectly. We may mention, however, that you can get out of the trouble of having different sections by allowing a break in the raking mould as at Z, Fig. 2. The mitre at the break runs across the width, and the one at the corner across the thickness.
The method of ascertaining the sections of mouldings should be used for all large, important work. If, however, you have a simple job to do requiring just one small length you can eliminate the setting out altogether. First work the return mould and cut its mitre. As already mentioned this is at 45 deg. and is cut straight down square. Fix it in position temporarily and prepare a piece of stuff for the raking mould. Its thickness will be the same as that of the return mould, but it will be rather narrower. Mark out and cut the mitre as described in Fig. 3. If preferred the adjustable bevel can be used entirely as in Fig. 4. The tool is placed so that it lines up with the slope of the raking mould, and the blade adjusted to line up with the mitre (see A). This gives the top marking.
Now set the bevel to the slope of the raking mould as at B. Mark the back of the mould and cut the mitre. Offer it up in position and with a pencil draw a line around the profile of the return mould as in Fig. 4. Work the moulding to the section thus produced.
— Meghan Bates
*A broken pediment is one in which the raking moulds, instead of meeting at the centre, are stopped short and are returned as in Fig. 1.
The Lost Art Press storefront in Covington, Ky., will be open this Saturday with lots of interesting stuff to try and to see. Here’s what you’ll find if you pay us a visit.
An authentic Douro chair. I’m studying this chair and its transit case for an upcoming commission. This chair is great fun. It fits inside its case. The case turns into a side table.
Lots of blemished books for 50 percent off retail. (Cash only, on these, please.) I’m picking up a sizable load of returned orders and books with dinged corners from our warehouse for the Saturday event.
Megan Fitzpatrick is finishing up a Dutch tool chest.
Brendan Gaffney is building a beguiling bookcase using persimmon panels that use “recording.”
The Electric Horse Garage is complete. We have HVAC, electricity, machines and no leaks. Our machine room is simple, but if you saw what we started with in September you might be impressed.
If you are looking for other fun stuff to do in the area this weekend.
Go on a tour of the New Riff Distillery (in Newport next door to Covington). It’s a gorgeous facility. Plus you should stop at Braxton Labs, next door to the distillery, and try some of the unusual beers they are cooking up.