The event hours are Friday, Sept. 20 from 10 a.m.- 6 p.m. and Saturday, Sept. 21 from 10 a.m.-5 p.m. We’re located at 837 Willard St., in Covington, Ky., 41011. Parking is free on the street.
From the press release: “We started these events to expose more woodworkers to the improvements in quality, environment, and enjoyment that handtool work can offer,” says Lie-Nielsen founder and president Thomas Lie-Nielsen, “and over the past decade we’ve seen their popularity explode with new and experienced woodworkers alike. Incorporating traditional tools and methods can offer even die-hard machinery users ways to bring their work to the next level. The fact that our tools don’t require earplugs or respirators just adds to the appeal.
“Lie-Nielsen staff will help demystify the world of hand tool woodworking and cover topics like sharpening, tool setup and use, and joinery. Visitors are encouraged to get hands on and ask questions.”
Christopher Schwarz, Brendan Gaffney and I (along with guest demonstrators yet to be announced), will be there, too. Like the Lie-Nielsen show staff, we’re happy to demonstrate and/or help you use any of the tools, reveal our “tricks” (ask Chris about his Magic Half Pencil!), answer questions about the Lost Art Press books, and more.
The Lost Art Press storefront will be open to the public from 10 a.m. to 5 p.m. Saturday, and I’ll give a free demonstration on scraping at 2 p.m. that day.
The lecture will cover:
Understanding scraping. How and why it works. And what that means for the sharpening procedure.
How to sharpen any scraper using a block of wood, your sharpening stones and a burnisher (no commercial jigs required).
How to grind scrapers to special shapes for mouldings, chair seats and general use.
How to set up and use scraper planes and the No. 80 cabinet scraper.
Note that this will absolutely, positively not be a shakedown/sales pitch for Crucible scrapers. In fact, I’m going to show you how to make your own curved card scraper so you don’t have to buy one. (Yes, we will have a few scrapers and burnishers on hand to sell. But that’s not why we’re doing this.)
We also will have our full line of Lost Art Press books for you to check out, including the gorgeous new one from Marc Adams, “The Difference Makers,” and David Finck’s “Making & Mastering Wood Planes.” We have a few lump hammers here in stock. I don’t think we have any blemished books, however.
My commute on Saturday to unlock the front door for the open day will be the easiest ever. We moved in upstairs, so I’ll just have to walk downstairs. Yesterday we opened up the door between the storefront and living spaces. The cats, while terrified, are curious. So you might also see a Lost Art Puss on Saturday.
During our most recent open day, Derek Jones gave a great lecture about French polishing for the attendees, and that made me think: We should do this every month.
So on our next open day, Saturday Aug. 10, I will give a free lecture at 2 p.m. on scrapers. This is a demonstration that I recently gave to the Society of American Period Furniture Makers. It covers sharpening scrapers, cabinet scrapers and scraping planes. Plus how to use all three tools and how to grind card scrapers to special shapes to deal with mouldings.
This is not information that I have published before. And it’s absolutely not going to be a sales pitch for the Crucible card scraper or any other product. It’s just a way for us to give back something to the woodworking community that supports us.
(I know someone is going to ask this in the comments, but we don’t have the technology to film or stream events from the storefront. So this is something that will occur in real life only. Apologies.)
Megan and I brainstormed a bunch of ideas for future lectures, everything from installing butt hinges to cutting mitered dovetails. If you have a particular topic that you would like to see, let us know in the comments and we will consider it.
As always, our open days are intended to be a fun way for you to meet other woodworkers, learn a bit about the craft and visit Covington and Cincinnati. If you ask, we will sell you a book or tool, but commerce is not the reason we open our doors.
The open day is from 10 a.m. to 5 p.m. on Saturday, Aug. 10 at our storefront. The store is located at 837 Willard St., Covington, Ky. 41011. Hope to see you there.
UNITY (2002). Curly maple, caretto and many woods from around the world. 25″ diameter. “A five-revolution Möbius style torus,” Malcolm says. “‘Unity’ celebrates the number five. A crosscut of the torus reveals a pentagram (five pointed star). If you were to trace any valley between any two ridges (or trace a ridge), you would make five revolutions before returning to your starting point. Does this make it a Möbius (one edge and one side)? The overall diameter is close to five squared (25″). In ancient times, the pentagram (derived from the pentagon) was a symbol for health and salvation, and in the Middle Ages, it was used as a symbol to repulse evil spirits. As a geometric form, the pentagram is quite significant; the bisected line lengths contain the golden ratio, the number known as phi, approximately 1.618. The number five has always been regarded as mystical and magical, and it relates to the human form. We have five fingers/toes on each limb. We commonly possess five senses – sight, hearing, smell, touch and taste – the list goes on and on. It has been said that, ‘All things happen in fives or are divisible by or are multiples of fives.’ This was a complex and challenging project, but there was relatively very little turning; however, every one of the 100 individual pentagram-shaped rings spent time on the lathe in order to create the matching concave curves. After assembly, the surface contained ridges between every small ring, which required extensive abrasive smoothing, but the final shape depended upon the pre-turning of the components.”
One of the people who had the greatest impact on Malcolm was his grandfather, Rap Gardner. At an early age, Granddad would give him guidance on how to make items with wood. He still remembers making a birdhouse before he started grammar school. From those early days Malcolm always had an interest in woodworking. It wasn’t until after he got married that woodworking became a necessary hobby. In 1976, after scraping together enough money with his wife, Tere, to buy their first home, there was nothing left for furniture. He purchased a Craftsman table saw and converted a bedroom into a shop (there was no garage) and proceeded to make their furniture, some of which is in use today.
In 1993, Malcolm had a shop full of tools and a house full of furniture, so his desire to stay active in the shop turned to woodturning. For the first year, Malcolm turned in isolation. He knew nothing about woodturning clubs, the American Association of Woodturners (AAW) or the fact that there were schools scattered throughout America that offered workshops on turning methods. Turning bowls was a great place to start, with instant gratification, but after turning a few dozen bowls, he found life at the lathe became boring. He started gluing in a few pieces of wood to add some character and color, not really knowing that he was creating “segmented” turnings.
CROOKED JOURNEY (2015). Peruvian walnut and white-dyed veneer, 8,800 individual pieces. About 14″ dia. “This is a very difficult shape to explain,” Malcolm says. “It’s an endless tubular ribbon. It’s constructed from 10 half-sections of five-sided donut shapes (five full donuts were used). To successfully complete the loop, three different donut diameters were created, with different orientations of the pentagon surfaces. The pentagon cross-sections severely limited directional changes. Each directional change occurs at the vertex of an imaginary decagon (10-sided polygon). The relationship between the five-sided donuts and the points of a 10-sided shape is what made the assembly possible. It was a bit of a head-scratcher to design. Finished with MinWax Wipe-On Poly.”
In 1994, Malcolm discovered there was to be an AAW woodturning symposium in Fort Collins, Col. Because he had the time and the resources he decided to attend and took along a few of his pieces to display in the open gallery. He was so new to turning that he had no idea who any of the presenters were but ended up in a workshop on deep vessel hollow forms taught by Clay Foster. This was his first exposure to professional turning – the first time that he witnessed another person turn wood. By the end of the weekend he befriended a gentleman by the name of Ray Allen, one of the world’s best-known segmenters. Ray was an inspiration to Malcolm and his first real turning mentor. Ray’s work as a segmented turner elevated the craft to an acceptable form of art turning, and it boosted segmented turnings to the collector level. Prior to Ray, segmented turning didn’t have a great reputation due to so many gluing failures and improper construction methods. However, Malcolm saw segmented turning as a truly unique art form that was in its infancy. He was hooked.
TOLERANCE (2005). Myrtlewood. About 32″ tall. “A complex ribbon form constructed with half-cylinders and half-bowls,” Malcolm says. “The designs, which are pierced through the wood wall and not painted, are symbols used by many cultures throughout history and the endless knot has its own meaning.”
Malcolm then discovered an AAW turning chapter in Sacramento and religiously made the two-hour trip to meetings every month for years. He became driven to learn all he could about turning while creating and developing new processes in his segmented works. By 1997, he became a regular instructor at the annual AAW symposium and eventually became a board member and even the vice president. Although he didn’t become a full-time professional turner until after he retired from the ski industry in 2002, his work was represented at a gallery in San Francisco called the Stones Gallery. Within eight short years Malcolm had gone from a turning beginner to a turner extraordinaire.
During the last three decades Malcolm has developed many innovations such as the porthole feature ring, ribbon construction, dizzy bowls, checkered hollow forms, tubular construction and orderly tangles. His work ranges from tiny jewelry items to outdoor sculptural pieces that require a crane for installation. He, along with Bill Smith and Curt Theobald, are the founding fathers of the Segmented Woodturners, an AAW chapter with hundreds of members around the world that host a biennial symposium. He has written three books, self-produced countless educational videos and has a big following on YouTube.
A TANGLED WEB (2014). 22″ dia. Inspired by the Sir Walter Scott quote, “Oh what a tangled web we weave, when first we practice to deceive!” “Composed of 12 five-pointed star shapes (pentagons with concave curved sides), arranged in an ‘orderly tangle,’” Malcolm says. “Won the Craftsmanship award at the 2015 Bridges Conference.”
However, his greatest contribution to the world of polychromatic turning is much more than inventing new ways to glue together pieces of wood. Malcolm is responsible for crossing the line between fine woodworking and fine turning. Through intuition, remarkable engineering and clever designs he has transformed the process of cutting, gluing and assembling wood in contorted ways. Then, with the skills of a virtuoso turner, he has proven that the two crafts, woodworking and woodturning, can collide and live in harmony.
This is a digital mock-up of the cover. The real cover will have far more texture.
You can now place a pre-publication order for our historical reprint of “The Joiner & Cabinet-Maker,” which will ship out in late September.
The price is just $12 as a thank-you to everyone who has supported us during the last 12 years.
The book is a copy of the original text from the early 19th century, likely 1839. It tells the fictional story of young Thomas and his apprenticeship in a rural British joinery shop. Plus there’s the villain, Sam, and the love interest, Sally. What’s most interesting about the book is the descriptions of historical practice. The anonymous author was clearly someone who had grown up in a period workshop.
This historical reprint is being printed on high-bulk paper to feel like the original text. The signatures are sewn for durability, like the original. And the book is covered in a heavy textured paper with gold debossing. (The original had a paper cover with a thin cloth cover, but we couldn’t find a printer that could do this economically.)
It’s a small book (4-1/8” x 6-3/8”) and a quick read – just 120 pages. And produced and printed entirely in the USA.
After the reprint arrives in our warehouse in September, we will also offer it bundled with our 2009 version of “The Joiner & Cabinet Maker,” which features essays from Joel Moskowitz and additional construction information from me. For now, we’re taking pre-publication orders for people who want the reprint only. This will keep the shipping situation much simpler.
As always, we don’t ship internationally. But we will offer this book to our international retailers. It is up to them as to whether they will stock it.
