Category: Uncategorized
Consider the Used Tool Chest
Though you might find this odd, a sizable chunk of my commission work is building tool chests and workbenches for people.
When customers first approached me with these jobs, I resisted. My response was: You’re a woodworker; you can build your own for much less money. But after further discussions, I realized that I could say this to almost any aspect of the craft.
Don’t have a shop? You’re a woodworker – build one.
Don’t have a handplane? You’re a woodworker – build one.
Don’t have a wooden floor?
Don’t have a dovetail saw?
And etc.
When it comes to the great Time Vs. Money Scale, some of us have more time. Others have more money. (Few of us have both or neither.) And so I started making workbenches and tool chests for customers. This also conveniently drained my supply of half-built tool chests and workbenches in my garden shed that were left over from classes.
For woodworkers who can’t afford a tool chest from me (they cost $2,000 to $3,500 depending on the options), I encourage them to buy a vintage tool chest. In the Midwest, South and East, almost every antique store has a chest to sell. You just have to tune your eyes to see them. Typically they are holding other items – plates, glassware or creepy dolls – and so they are easy to miss.
They often show up in local auctions – an Amish auction near me usually has a dozen chests each year.
And the price is right. About $200 to $400.
Most of them need to be cleaned up. The tills are worn out and need to be repaired. Mouse holes are common. Rot in the bottom boards is a frequent feature. Dislocated hinges and a pink paint job round out the list of things you’ll want to remedy.
But it is a great alternative. Most chests can be fixed up with a day of work in the shop. And you will get a gold star in woodworker heaven for saving a tool chest from its doom as another plant stand.
— Christopher Schwarz, editor, Lost Art Press
Personal site: christophermschwarz.com
Coming in 2018: The Lost Art Press Work Jacket
I have two favorite garments: a beat-up motorcycle jacket for winter and a traditional French work jacket for the other three seasons.
The work jacket, sometimes called a bleu de travail, was popular in the late 19th century and the early 20th century among the French working classes – especially farmers, masons and woodworkers.
The jackets are simple, unlined and incredibly durable. They typically feature four roomy pockets – three on the outside and a fourth on the inside that usually is embroidered with the maker’s name. The only other evidence of the pedigree of the garment is usually found engraved on the buttons.
I wear mine in the shop and when working on our building. The pockets are great for holding tools and the jacket is designed to accommodate a wide range of motion. I can saw and plane in this jacket, and it moves nicely with me. In fact, many times I simply forget I’m wearing it. The more it gets beat up, the better it looks.
It’s also just nice enough to wear out to dinner (once I dust it off).
Most of the French work jackets you’ll find for sale are blue, which was the preferred color of farmers and all-purpose laborers. Management wore a similar jacket in a light grey or white. But French (and German) woodworkers definitely preferred black.
For many years I’ve wanted Lost Art Press to produce a work jacket that was faithful to the originals in every way, including the cotton moleskin cloth, the distinct stitching, the engraved buttons and even the embroidered inside pocket. And, because I’m a woodworker, I wanted to offer it in black.
So we’ve teamed up with designer and woodworker Tom Bonamici, who is similarly obsessed with these jackets. Tom has designed a work jacket based on a vintage one he owns. And last week, the factory (here in the United States, of course) produced the first successful prototype.
We are very excited.
In the coming weeks, Tom is going to share the history of these jackets, the details of their construction and how a garment goes from a cool idea to something you want to wear every day. And, in early 2018, we will offer these for sale.
We don’t have prices or a timeline yet. But all that is coming soon.
— Christopher Schwarz
Geometry in Time for the Holidays
In the spirit of the holidays, let’s perform some simple, ancient geometry to create the iconic symbols of the two religions celebrating major holidays this month. You’ll need only a compass, a straightedge, a piece of paper and a couple of candles to illuminate your work. In chronological order (in more ways than one) let’s start with Judaism’s Star of David:
Begin with a circle and mark the focal point. We have actually started with the symbol for Ra, the ancient Egyptian sun god for whom winter solstice was celebrated for thousands of years prior to Judaism – but that may or may not be another story.
Now draw a line vertically through the focal point (i.e. a diameter) and mark its intersection points at the rim.
Next set the compass to span from one of the rim intersection points to the focal point and swing an arc through the rim as shown. Mark the arc’s intersection points.
Repeat from the other rim intersection and mark two more rim points.
Connect all the rim points across the circle.
Erase the circle rim, diameter line and interior arcs and you are left with the Star of David.
Now let’s create the Christian cross – also from the intersection of line and circle:
Again we’ll start with a circle (which came to represent the heavens), but this time we’ll draw the diameter line at about a 45° angle.
Construct another diameter line at a right angle to the first. Use the intersecting arcs method (or just fudge it, I won’t tell).
Connect the rim intersection points to create a square (which traditionally represents the four directions, the four seasons and the earth itself).
Now bisect the lower horizontal line and extend the bisection line from the focal point down past the lower rim of the circle.
We’ll set our compass to the span between the rim intersection point and focal point, and swing a second circle. (A second of a pair of circles traditionally represented the Dyad … the reflection, the knowing of the first circle called the Monad (all one/alone).)
When we erase most of the lines we are left with a cross … a symbol of the melding of heaven with earth. Or for the math geeks: a pairing of a diameter line (2) with the non-terminating (i.e. irrational) square root of two.
Note: This geometric construction of the cross is not historical but rather the product of my imagination.
— Jim Tolpin, one of the authors of “From Truths to Tools“
Coming Soon: More Classes at Our Storefront
When I purchased my shop building in Covington, Ky., I swore I wasn’t going to open a woodworking school. And, in all honesty, I still don’t want to run a school or return to teaching.
I will, however, allow my friends to use the space to teach classes.
So, in the coming weeks you can look for Megan Fitzpatrick and Brendan Gaffney to offer additional classes at our storefront. Brendan is especially keen on offering low-cost, one-day workshops for locals to introduce them to woodworking, sharpening and woodworking tools. Why? Almost every day people stop by the storefront asking if we will teach them how to build things. (Today, a plumber and a barber asked for classes.)
Megan has a full roster of classes that we have been planning for many months, including a Morris chair design that was made here in Cincinnati, Ohio.
In conjunction with these classes, we also plan to open the mechanical library up for the public to use. The library is still under heavy construction – Megan and I need to build a 12’-long run of shelves to house part of the collection.
So things are changing here – for the better. By the end of the year the Horse Garage will be a fully functional shop with a few good machines. We’ll have space for me to continue my research and build commissions. We’ll have space for Megan and Brendan to offer instruction. Plus rare old books to blow your mind.
One final note: All of our projects begin incredibly small in nature. Lost Art Press sold about 2,000 books its first year in 2007. (We’re up to about 40,000 a year now. That’s a pathetic growth curve for corporate America, but I have only two words for corporate America.) Crucible is still in its infancy, as are our plans for the storefront. I want things to grow organically and be bulletproof. No debt. No reaching for things beyond our grasp.
I hope you’ll join us on our slow journey.
— Christopher Schwarz