Several commenters to yesterday’s post about the origin of the Chinese planning stop, known as the palm, offered some additional information and a Western version.
In the wheelwright’s shop shown in the 12th-century scroll “Qingming shanhe tu” we see a palm at the end of the bench. It is made of two pieces of wood nailed to the bench.
The palm was later known as the Lu Ban qi, or Lu Ban’s wife, because the palm was the brilliant idea of Lu Ban’s wife. (Not to mention she no longer had to act as the planing stop or sustain injury when Lu Ban got a little crazy with the planing). Ban Qi is still used as a term for a planing stop. A modern version of the V-shaped palm is below and is adjustable.
A Western planning stop with similarities to the palm comes from “The Young Mechanic” by James Lukin published in 1872:
Another version using two pieces of wood and wedges to secure the work piece:
My thanks to our readers for joining the discussion and offering more ideas!
Tool vendor on the Rainbow Bridge in the “Qingming shanhe tu” 12th c. scroll. Image from Yale University.
Lu Ban, born some time between 770 and the 5th century BC, is the divine protector of Chinese carpenters and artisans. He is credited with inventing the basic tool kit of the carpenter and the rules, measurements and rituals associated with building construction. He and his wife* are featured in many Chinese folktales. One story, as told by the Bai ethic minority of Yunnan Province involves how the palm, or planing stop, was invented.
The Origin of the “Palm”**
When Lu Ban needed to plane a piece of wood he would call his wife to come and hold one end of the wood with both hands. She would use all her strength to hold the wood steady. But this was not a good way to evenly plane the entire piece of wood. Too light a hand and the wood would not be smooth and too heavy a hand and the plane would run into his wife. Once, Lu Ban’s strength on the planer was too heavy and the head of the plane hit his wife in the chest, the blade cut her hands and she was pushed to the ground. Lu Ban dropped the plane and rushed to help his wife.
Lu Ban’s wife sat dazed on the ground gazing at her bloodied hands while Lu Ban fretted and did know know what to do. His wife suddenly smiled and realized what she should do. She got up, grabbed a saw and cut two pieces of wood in the shape of a palm. Next, she nailed the pieces on the bench top. She had Lu Ban place the wood to be planed between the two pieces to hold it steady and there was no longer any need for a person to hold the wood while the carpenter used the plane.
Lu Ban admired this idea of his wife and he called the two pieces a “palm.” Later, carpenters changed from wood to iron but still called this invention a “palm.”
Finding the “Palm”
I asked Chris if he could visualize the palm and he suggested placing your hand palm-up (that was the bench surface) and bend four fingers pointing towards the ceiling (the stop). But that configuration didn’t help me see a “palm.” Many images of the low Chinese workbench are hand-drawn and do not show a huge amount of detail. So, the next step was to check through the images I already had and also look for new ones.
The Arrowmaker, 19th century.
The Arrowmaker has a planing stop, but it doesn’t look as though it would be termed a “palm.”
17th c. Chinese wallpaper on silk at Saltram. Carpenters making tea chests. National Trust photo.
Four benches but no “palms” here.
Lu Ban’s wife nailing a planing stop to a bench.
In this 20th century Chinese comic strip Lu Ban’s wife nails what looks like a doe’s foot to the bench. The doe’s foot, a work holding appliance, is featured in Plate 14 of the forthcoming “Roubo on Furniture” and you can read a blog post Chris did about using one here.
Doe’s foot (top) and workman using a planing stop, 18th century, from Plate 14 by A.-J. Roubo.
The notch in the doe’s foot seemed to be closer to what the “palm” might look like. The answer came from “Qingming shanhe tu,” a scroll done with ink and brush by Zhang Zeduan during the Song Dynasty in the first quarter of the 12th century. The scroll is 25.5 cm high, 5.25 meters long and is in the collection of the Palace Museum in Beijing. The scroll shows the gatherings for the Qingming celebration in a vibrant riverfront city. The image at the top of this post is one of two where a woodworker’s bench can be seen.
In a short passage in a book about 15th-century Chinese carpentry there was mention of a wheelwright’s shop in the scroll and whether the workman at the bench is using a drawknife or spokeshave.
Center: the wheelwright’s shop on the “Qingming shanhe tu” scroll.
Find the large tree just off center in the scene above. The wheelwright’s shop is just to the left of the tree and partially under an overhanging roof.
Wheelwright in the “Qingming shanhe tu” scroll. Image from Yale University.
Given the large size of the scroll the scene is too small to discern which tool is in use but what can be seen is the workman is pushing the tool as evidenced by the V-shaped wooden ‘bench stop’ nailed to the end of the bench. This ‘bench stop’ is called a “Lu Ban qi” which translates as Lu Ban’s wife. As Lu Ban’s wife knelt at one end of the bench she held her hands on either edge of the wood. Placed together her hands would form a V. This is the “palm.”
*In the folktales of the Bai Lu Ban’s wife is not given a name, but in other stories she is called Yun.
**This story is based on a Bai folktale translated by Jessica Marinaccio for her thesis for a BA with honors in Chinese at Williams College in 2006.
If I had to guess, I’d say my wife’s favorite projects of mine are the coffins I built for “The Anarchist’s Design Book.” One coffin ended up at Raney Nelson’s place (it’s where he sleeps, I think). One ended up on the wall in our TV room and holds my vinyl records. And the third is in the basement and is trotted out for Halloween.
Lucy, my wife, adores Halloween.
Building a coffin is great fun, whether you are making it for yourself and your final remains (as I did), to use as a liquor cabinet/vinyl record cabinet or yard decoration.
For fun, here’s the chapter on building a kerf-bent coffin from “The Anarchist’s Design Book.” It’s in pdf format. No DRM or any garbage. Just something fun to read and try.
As a furniture maker, visiting museums is important. But what is more important is visiting those same museums again and again. Every year you are a different person, and the same pieces of furniture will look new and different to you every time you visit.
On Sunday I took my 10th or 11th trip to the Shaker Village at Pleasant Hill in Harrodsburg, Ky., with woodworkers Megan Fitzpatrick and Will Myers. I got to visit a lot of old friends that day at Pleasant Hill, such as the wall-hanging cabinet and Saturday table. But I also made a new friend: a firewood box that I’d never noticed before.
This box represents what I like about Shaker design. It is simple, practical and shows an advanced understanding of geometry. The carcase itself is nailed together, but the parts are arranged so that there are no awkward places where parts overlap or are misaligned – something you see on a lot of vernacular furniture.
For example, the maker was careful to add small fake stiles (with nails) to the bottom of the case to make the drawer inset. As a result of this extra effort and a hundred other details the exterior carcase of the piece appears to be like the carcase of a complex piece of furniture, though it clearly is not.
The profile of the carcase shows the maker had a good grasp of geometry – Roman vs. Grecian. The curve on the side of the carcase is an elliptical arc with a perfectly sized fillet where the curve meets the front of the carcase. It’s like an enormous Grecian ovolo.
The feet on the sides of the carcase echoed this Grecian ovolo without screaming this fact.
And then (while no one was looking) we opened the drawer at the bottom. It had sweet and well-executed dovetails, a nice surprise on a nailed piece.
I hope to build a reproduction of this piece someday, but we’ll first have to get a working fireplace. The last time we lit a fire in our living room it ended with me running half-naked into the snow.
At noon EST on Friday, Oct. 14, we will put the first batch of dividers up for sale on the Crucible Tool website: crucibletool.com. We are now in continuous production and Raney Nelson has the mill humming at a fast clip.
If the first batch sells out quickly, don’t fret. We plan on keeping production moving as quickly as possible to meet demand and will offer another batch the following week.
The dividers are $120, which includes domestic shipping. I’m afraid we don’t have the ability to ship internationally. We are working on first opening up sales to Canada in the coming weeks, then we’ll take a look at the rest of the world. Shipping these holdfasts overseas might not make sense.
This week I’ll post some video that shows how we make the dividers, from roughing out the stock to final assembly.
Another version using two pieces of wood and wedges to secure the work piece:
