Good news: We have Crucible GoDrillas and Center Squares back in stock and ready for immediate shipment. We assembled and inspected a huge bunch, so we hope they won’t sell out.
If you are wondering what a GoDrilla does, or why you would want a Center Square, check out the pages in our store, which have videos that (I hope) explain their utility.
— Christopher Schwarz
After Jennie Alexander died in 2018, she left a house full of tools, chairs and bits and pieces from her long life of woodworking, research and writing. For several months, her friends and family sorted through the possessions and distributed them so they would do the most good.
Shortly thereafter, we traveled to Jennie’s Baltimore home for one last time: to shoot step photos for the third and final edition of “Make a Chair From a Tree.” As we were leaving her home on Light Street, Jennie’s daughter Harper implored us to take some of the objects that no one else would.
Otherwise they were going to charity or the resale shop.
Among the few things I took was this hacking knife. Clearly blacksmith-made, it’s a heavy sucker at 1 lb. 4 oz. It’s made from 3/8”-thick steel. Overall the knife is 9-1/2″ long. The blade is 4-1/2″ long and 2-7/16″ tall. The handle is 5” long and 3/4” tall.
I asked Peter Follansbee if he knew anything about the knife, and he sent me to blacksmith Tom Latane.
“I may have made that one,” Tom replied. “I think I also made one with a more shapely handle. The first one I made (which looks much like that) J. Alexander rejected because it wasn’t heavy enough to split pegs by knocking the cleaver and pegwood against the chopping block once the cleaver was stuck in the wood. The lightness hasn’t been a problem for me since I never made the super long pegs that J. did. I just strike it a couple times with the mallet, and the wood pops apart.”
I’ve been using the knife for a few years now and think it’s perfect. I use it to split pegs, of course, but also to make short sticks. It also has a very Jennie-esque quality to it as it is so outwardly plain. In fact, it didn’t even really look like a tool when I first saw it among the clutter in her workshop.
But now I wouldn’t be without it.
I get occasional questions about the knife after I showed it in use in “The Stick Chair Book.” Plus we get asked: When will Crucible make them for sale? I think the answer is never. This is a tool that is best made by your local blacksmith. So take the dimensions listed above to their shop and see about getting your own Jennie Alexander Hacking Knife. You’ll be glad you did.
— Christopher Schwarz
Editor’s note: Here’s another essay I wrote in support of my new “Build a Stick Chair” video. My plan was to record these essays and set them to music with some images. I tried it, and it looked like the most boring slideshow with a narrator on quaaludes. So I present my script here, which you can read in your most excited voice (in your head).
When I worked for a woodworking magazine, we had a formula for the sorts of projects we printed in its pages. We always had a certain number of Shaker pieces, a slightly smaller number of Arts & Crafts pieces, some “Country” pieces (whatever “country” is). Plus a handful of 18th-century pieces, mid-century modern pieces, workshop pieces, jigs and fixtures.
The formula was safe. It was based on the thousands of subscriber surveys we sent out year after year. And it worked.
But it was also boring.
Every inspiring Shaker piece has been published to death by every woodworking magazine on the continent. Ditto with Arts & Crafts. Yes, there is a lot of amazing material you could mine from the 18th-century. But a magazine can publish only so many 18th-century pieces before readers revolt (most of those pieces are challenging to build; magazine readers tend to be beginners).
I love these classic furniture styles. If you like the decorative arts, I am sure you do as well. But there’s not much left to explore.* And I have little interest in walking the same path that has been trodden for the last 50 years.
So – and I know you’re shocked to hear me say it – this is one of the great things about stick chairs, and vernacular furniture in general.
It is a field that is largely unexplored. There is no book on stools – one of the most common pieces of furniture on the planet. There are only a handful of books on vernacular chairs, chests, beds, tables and shelving. It’s like there’s a whole planet filled with furniture that has been almost completely ignored.
For the last 18 years, I have specialized in researching and building stick chairs, and I still feel like I’ve only scratched the surface of what’s out there. You can do it, too. How? Look at lots of old paintings. When I look at old paintings – a great source of information on early rural life – I ignore the people and focus on the furniture.
When you do this, you will wonder why there has never been a book on settles. Gate-leg tables. Pig benches. Plus all the convertible furniture that was necessary for regular people to live in a small space – benches that converted into beds. Chests of drawers that also held chickens. Dry sinks that stored all manner of kitchen necessities.
The reason there are few books on this vernacular stuff is, of course, money.
Rich people don’t care about this stuff. That’s because your rich friends aren’t going to be impressed that you have a beat-up bacon settle in your boudoir. All the money for research, coffee-table books and museums goes to the high-style stuff because it was the stuff owned by the rich people in the past.
Rich people loved it and desired it. So it must be important.
I’m not rich. And I’m guessing you aren’t either. So why don’t we explore *our* furniture past? The stuff that was made by the person who needed it. The stuff that wasn’t designed to impress the neighbors. The stuff that looks better the more it gets used.
It might be our furniture past. But with a little work it also might be our furniture present and our furniture future.
— Christopher Schwarz
* There is some new ground to be explored. But alas, we have to twist Megan’s arm to make it happen.
The following is excerpted from “The Stick Chair Book,” by Christopher Schwarz. (His “make pretty” process applies to all of his projects, not just chairs.)
“The Stick Chair Book” explores the craft of “hedge carpenters” or dabblers who built chairs for the everyday home. The chairs they made weren’t designed to impress the neighbors – they were designed to be comfortable, stout and (if you have a good eye) nice to look at.
After 18 years of building vernacular stick chairs and studying historical examples in the U.K., Europe and North America, Schwarz has figured out how anyone can design and build these chairs without a lot of gear.
Here are the things you don’t need to build a stick chair: a shavehorse, drawknife, steambox, green wood, axe or even a passing knowledge of geometry.
Instead, most of the work is done with saws (a band saw speeds things up), a drill or brace, a jack plane and maybe a couple specialty tools if you want to saddle the chair’s seat. You can use any kind of wood, even stuff from the home center.
At some point during my life as a woodworker I decided to add one more step to the construction process of every piece of furniture I build. Instead of stampeding from assembly into finishing, I added one day of work that I call: Make Pretty.
On this day I do nothing but try to bring every surface of a piece up a notch. I look over every inch – slowly – to find small defects that can be remedied, or details that can be made crisper. I look at bevels and mouldings to see if I can tweak their corners so they flow more smoothly. I look for tiny bits of glue or splinters (even on secondary surfaces) that I can pare away. I check curves and overhangs to see if they can be subtly altered to be more harmonious with the rest of the piece.
Make Pretty might sound like a drag. But I find it to be the most satisfying part of making a piece of furniture. For one whole day I get to look at a thing I’ve made before it heads off to a customer. So many times, I’ve looked at photos of my pieces that are now 1,000 miles away, and I can barely remember working on them.
Make Pretty is the conjugal visit before the great separation.
I have a set of tools that I use for every session of Make Pretty. Here’s the list:
• A moving blanket/furniture pad.
• A freshly sharpened cabinet scraper.
• A handful of flat sticks that are covered with #100-, #180- and #220-grit sandpaper (basically shop-made emery boards). The wood backing makes crisper lines than hand-held sandpaper.
• A sharp 1/2″ chisel.
• A cork sanding block and #220-grit abrasive.
• A small UV flashlight (which highlights smears of hide glue).
• Hot water and a toothbrush (for removing the smears of hide glue).
• My shop’s two logo stamps.
For me, Make Pretty begins with the smallest details. I put the chair on a moving blanket and look at every joint in the piece. I ask: Can I do anything to make this better? In a case piece, this might mean a little bit of glue and sanding dust to conceal a hairline gap. In a chair, it might require a sliver of a wedge to fill a void where a wedge shifted during assembly.
I look for stray splinters where tenons were driven hard into mortises. I look for tiny beads of glue that evaded my eye after assembly.
After looking at joinery, I look at individual components. I examine each stretcher to see if there are odd flats where the double-tapers meet. Is there any tear-out I can remove? Do the stretchers transition evenly into the tenons? Can they be evened up?
The same goes with the chair’s sticks. Mostly I look to see if there are small irregularities I can correct. Many times a stick’s tenon is slightly offset from the center of the stick. A little scraping on the heavy side of the stick can easily conceal this.
On legs I look for dents that occurred while moving the chair about. Can they be steamed or scraped away? On the arms and the shoe I look for tear-out, corners that aren’t crisp and bevels that don’t meet evenly.
This process continues over every single component.
After that, I look at broad surfaces. Can I improve the line between the spindle deck and the saddle? Can I make the pommel crisper? Is the curve on the comb perfect, or can I eliminate small bumps or hollows with some sanding? Are the arms perfect to the touch? (Because they will be touched.)
I spend extra time looking at any end grain that shows in the piece. Because end grain is more difficult to work than face grain, it’s fairly common for the end grain to need some extra attention to remove scratches so it matches the finish level of the face grain.
Getting Ready for Finishing
When I have corrected every error I can find, I turn to making the arrises of the piece ready for finishing. In most commercial work, all edges get “broken” by a quick rub with fine sandpaper. Breaking the edges makes the piece pleasant to touch – and can prevent sharp arrises from cutting flesh.
But I like to go one step further. On the most visible surfaces – the crest, the hands and the seat – I’ll sand a small bevel using my sticks that are coated with adhesive-backed sandpaper. This bevel is about 1/32″ across. And it takes time to do it right. When the bevels meet at corners they need to be the same size.
Has a customer ever noticed this and brought it to my attention? No. But I do it anyway. I love to see the consistent little bevel as it catches the light on the corner of the crest or the hands.
Even if you aren’t as crazy as I am, make sure you break all the edges of the piece before you add any finish.
Once I complete the Make Pretty, I have to decide how I will mark the chair with my shop symbol – a pair of dividers. I have two shop marks. One large and one small. I first mark the underside of the seat with the large dividers. Then I add one mark with the small dividers for every error in the piece that nags at me. It might be one or two marks. But it is a reminder that I’m human and I acknowledge my mistakes. (And perhaps some day I’ll make a piece that doesn’t have any small marks.) I’ve never told my customers this, so keep your trap shut, OK?
Lastly, I write the month and the year below my shop mark in permanent marker. I don’t try to imitate old work, but I’d hate for some idiot to represent it to some moron as an antique.
Templates are the foundation of my design process. While I occasionally make a full-size mock-up of a new design using cheap wood, it’s my templates that guide the process.
And when I teach a class, I encourage students to trace whatever templates they like onto the huge sheets of butcher paper we keep here. My first chair teacher – Dave Fleming – offered me the same courtesy in 2003, and I still have those templates today (stored in my basement).
Other teachers were not as forthcoming. They either said “no” or insisted on selling the information. Woodworking is a tough business, so I can’t blame them. But I’d rather lose a few dollars and see more people make their own chairs.
If you are just getting started, I encourage you to make a set of templates. If you’d like to experiment with one of my sets (drawn by Josh Cook), download the file below and print it out at your local office supply store. The plans are drawn at full-size – 100 percent.
I like to make my templates using 1/8” hardboard. It is inexpensive, doesn’t warp as much as plywood does and its edges stay crisper than those of MDF. I affix the paper drawings to the hardboard with spray adhesive (available anywhere). Then I cut out the templates on the band saw and refine the shapes with hand tools.
Hardboard is simply wood pulp and linseed oil, so it cuts cleanly and doesn’t wreck your tools’ edges unnecessarily.
I write a lot of information on my finished templates – resultant angles, notes from previous builds and details on angles and joints.
But the most important thing I write on the template is the date that I made it. That helps me figure out if I am moving forward or backward in time with my designs (either direction is OK).
The templates above are from my latest video “Build a Stick Chair,” which is available in our store.
— Christopher Schwarz