Basically, Horton has slashed prices so most of its stock of cut nails are $6 a pound, with the exception of the expensive cut headless brads, which are $6 for 1/4 lb. (still a good price).
I’m a tool chest guy. At the end of the day all my tools go back in my chest to protect them and to soothe my head (I am a tidy German). When I’m working with my tools at the bench, I also like to keep them sorted – simply so I can work faster.
And that’s why I bought a Texas Heritage Woodworks Saddlebag and screwed it to the rear of my workbench. (FYI, I buy all my tools and etc. at full retail. I receive no “promotional consideration,” “affiliate monies” or “reach-arounds.”)
Like everything Jason and Sarah make, the quality is top notch. The seams are tidy, sturdy and riveted for strength. The pockets are thoughtfully designed to hold a variety of small woodworking tools.
My Saddlebag is set up to work like a traditional rack on a French workbench – it’s located opposite the face vise and slightly below the bench’s work surface. With the Saddlebag in this spot I can stick my typical small tools there while I work, and I always know where my 6” square and mechanical pencil are. (My ears are simply too big to tuck a pencil there – it would have to be the size of one of those pencils we had in kindergarten.)
The Saddlebag is also ideal for hanging inside a Dutch tool chest (check out this gallery of these chests on the Popular Woodworking blog).
I’m sure this will be on my “Anarchist’s Gift Guide” this holiday, so now you can beat the rush.
The following is a description of the break room at the military museum where I worked as a carpenter’s assistant in 1987.
Part of the farewell card I made for my colleagues when I left.
By far the best thing about the job was the break room, where about a dozen of us from different departments gathered each morning around half-past 10, then for lunch at one, and again, later on, for tea. An industrial-size kettle sat on the stove; a roster indicated who would be in charge of making tea before the others arrived. On my first day, George told me how much tea to throw in the pot and how high to pour the water when the kettle boiled. There was always a bottle of milk in the fridge and a bowl of sugar nearby.
The men would stroll in, pour themselves a cup of tea, and take their customary places. Aside from two younger fellows, most of them appeared to be in their 50s or 60s and coasting toward retirement. The break room sped them on their way like one of those moving sidewalks at the airport.
Most of them were married. Their wives packed their lunches, wrapping sandwiches in neat paper or plastic bags, tucking in a packet of crisps alongside some radishes or carrots from the garden. They’d pop in some other little treat — a couple of chocolate digestives, a small container of fruit cocktail, a slice of leftover Madeira cake from a picnic with the grandkids. It seemed clear that most of these men were well cared for and well trained. And because they were expected to behave themselves at home, they leapt at the chance to have some fun with the 27-year-old temp.–Excerpted from Making Things Work
The “Sharpen This” stickers have been making the rounds on Instagram – this is my favorite one so far.
My daughter Maddy reports she still has a fair number of this set of stickers left. So if you want a set, here are the details. You can order a set of three from her etsy store here. A set is $6 delivered ($10 for international orders).
Or, for customers in the United States, you can send a $5 bill and a SASE (self-addressed stamped envelope) to by daughter Maddy at:
Stick it to the Man
P.O. Box 3284
Columbus, OH 43210
As always, this is not a money-making venture for me or Lost Art Press. All profits help Maddy through college. (She’s a senior!)
During the day, I hold a pair of our Crucible dividers and rub them like a worry stone or a rosary as I write, think or ponder my path forward at my workbench or my laptop.
The curves and chamfers of my dividers – I own only one pair – are as familiar to me as my wife’s hands or the tote of my Lie-Nielsen No. 3. The weight is reassuring. The stiffness of its hinge is something I measure every time I pick them up.
And when my mind runs out of ideas, I look down at the dividers in my hand and marvel at how difficult it has been for us to get these five pieces of steel to fit together and move deliberately.
During the last two years Raney, John and I have had to learn a lot about metal, casting, machining, laser-cutting and a host of other allied skills to keep Crucible Tool afloat, making tools and growing. Despite all this effort (and sometime anguish), these dividers remain a true wonder to me.
Raney began his design with an Art Deco pair my mother found in an antique stall. That vintage pair was an interesting design, and Raney and I stared at them for a long time, knowing they contained the kernel of a good idea.
But the tension in its hinge wasn’t adjustable. It was difficult to pull the legs apart. They had unnecessary bulk.
After weeks (months?) in his lab, Raney emerged with this tool. And it has replaced my pocketknife as “the thing” that is always in my hand.
Truth: They are a total b&^%h to manufacture. The fit between the sex nuts and the two legs has to be within a half of a thousandth of an inch. If we miss that specification, the legs have a bit of slop in them that we consider unacceptable. Many dividers have this slop, which can make your layouts a bit cattywumpus (though not disastrous).
John, who does our quality control, puts it this way: “That slop would be fine if these dividers were $50. But for $187? They have to be better than that.”
They are. Thanks to Raney and John, these are the best pair of dividers I’ve ever owned. I know this sounds like bullcrap coming from someone who is part of Crucible, but so be it. I am unashamed at my love for this tool. It is the result of hundreds of hours of grief and inspiration.
Every day, dozens of times I day, I test them. They open smoothly. They close the same (and without slipping). And so I test them again and stare at the work on my bench.
— Christopher Schwarz
P.S. We have 30 dividers in stock today with another 30 about to go to the warehouse and another 100 in the CNC mill. You can order a pair here.
