Lost Art Press

Campaign Furniture at WIA

Posted on by Lost Art Press

I love football as much as I love a cold-water enema.

Wait. Perhaps I love it less.

In any case, if you are attending the Woodworking in America conference this weekend, be sure to stop by the Lost Art Press booth and the classroom where I’ll be teaching. We’ll have my campaign secretary on display, as well as a Roorkhee chair wrapped in genuine NFL football leather. Yup. It’s waterproof leather, as long as you sew it into some semi-spherical form so the inside is not exposed to the elements.

So let’s call it “weather resistant.”

It’s a nice and nubby leather. One female visitor to our shop (who shall remain nameless) commented: If you took off all your clothes and sat on it, it looks like it would give you a nice massage.

Something else to note: Ty Black, my shop assistant who is shown napping in the chair and fully clothed thank goodness, will soon be offering leather and canvas kits for Roorkhee chairs. These will be for sale through the Lost Art Press store. You’ll have a variety of leathers and sizes to choose from, including the one that is used to massage naked people.

So stay tuned. And do stop by our booth in the Marketplace and say hello.

— Christopher Schwarz

Changes to the Roubo Event — Please Read

Posted on by Lost Art Press

We were forced to move the time of our Roubo event to 3 p.m. this Friday (instead of 6 p.m.) because of a scheduling conflict that was out of our control.

It’s a long and complex story, and I’m going to skip the details about why this happened. So as a result of this change in timing, there’s some good news and bad news.

The good news: The event will be a lot closer to the Northern Kentucky Convention Center and we now have the space to accommodate a lot more attendees.

The Roubo event will now be from 3 p.m. to 6 p.m. at The Grand, which is located in the Oddfellows Hall at Fifth Street and Madison Avenue in Covington.

Directions to The Grand are here. It’s a very short walk from the convention center.

Yes, we know this conflicts with some classes at Woodworking in America, but we hope you can stop by The Grand because we have some great stuff to show you and give you. Yes, give you.

Here’s the stuff we were keeping under wraps:

1. The first 200 people to stop by will receive a special printed keepsake of one of the plates from A.J. Roubo. This was designed by Wesley Tanner, the designer of the forthcoming translation of Roubo titled “To Make as Perfectly as Possible.”

2. And for the first time we will be taking pre-orders (and deposits) for both the limited edition volume of the Roubo book and the standard trade edition. This is the only place and time we will be taking pre-publication orders at this point. We’ll open up pre-publication orders for everyone later on this year.

So add all that to the other cool stuff – seeing the real first-edition Roubo, the tools, marquetry panels made from the book – and it should be worth your time.

No need to register – just show up. We have plenty of space for you at The Grand.

The bad news? There will be no alcohol at the event. My recommendation is to stop by AmerAsia (half a block south of The Grand) and get a beer before or after our event. AmerAsia has the best craft beer list in the city. (And the dragon’s breath wontons are awesome, too.)

I apologize for the change in time and want you to know that it was out of our hands.

— Christopher Schwarz

Recent Shop Talk

Posted on by Lost Art Press

“You could just buy a window like that in a store. But maybe not in oak, or not unless you went to a joiner. What kind of wood did you use for the bottom part there?”

“At school we had real benches, you know made of beech.”

“That’s made of two boards? Ah, OK, but you don’t have that kind of machine that you use to make the edges flat… Yes, a jointer.”

“Papa, when are you going to finish my bow?”

“Where are all your real tools?… You know the electric ones, um with tables or something?”

“You made that with that? I see those kinds of planes all the time at the flea markets. You don’t have a router?”

“Hey Coppette, I saw something like this in that book you translated. Take it. No, it’s your’s. I have a couple of them, and I never use them.”

I can’t imagine the comments I will get if I get pretty good working wood with my hands.

— Brian Anderson, the translator of “Grandpa’s Workshop.“

New: Leather-bound ‘Mouldings in Practice’

Posted on by Lost Art Press

We now have 30 copies of “Mouldings in Practice” available for sale in the Lost Art Press store. The books are hand-bound in brown calfskin by the artisans at Ohio Book Store in downtown Cincinnati. The cost is $185 postage-paid to anywhere in the United States.

As with all of our leather-bound books, these feature a rounded spine and hand-colored end sheets. The brown calfskin cover the boards has been gently aged, which gives the books a slightly broken-in look. The spine on this edition also has a classy detail debossed into the leather.

These books are available to ship immediately. Click here to go to our store.

The book turns a set of complicated mouldings into a series of predictable rabbets and chamfers that guide your hollow and round planes to make anything – anything – that has been made in the past or that you can envision for your future projects.

During the last several months, we had many proofreaders edit this book and the universal reaction was much like this:

“Well crap. Now I want to buy some of these stupid planes.”

During the past 14 months, Matt and I have been working to make “Mouldings in Practice” into a book that is accessible for even the beginning hand-tool woodworker. It uses more than 200 color illustrations and dozens of photos to explain how to lay out, prepare for and cut any moulding you can draw.

The first half of the book is focused on how to make the tools function, including the tools that help the hollow and round planes – such as the plow and the rabbet. Matt also covers snipes bills and side rounds so you know their role in making mouldings. Once you understand how rabbets and chamfers guide the rounds and chamfers, Matt shows you how to execute the mouldings for eight very sweet Connecticut River Valley period projects using photos and step-by-step illustrations and instruction.

— Christopher Schwarz

Update on Leather-bound ‘Mouldings in Practice’

Posted on by Lost Art Press

The leather editions of “Mouldings in Practice” by Matthew Sheldon Bickford are finished and ready to be picked up from the bindery.

Unfortunately, I’m on a bus to Chicago today.

So here’s the update: The leather books will go on sale Monday about noon Eastern time. They will be $185 postage-paid to anywhere in the United States. We have 30 of them for sale, and it will be first-come, first serve in the Lost Art Press store.

I’ll make an announcement on the blog at noon on Monday with photos and links.

Thanks for your patience.

— Christopher Schwarz