Lost Art Press

Report from Mount Roubo

Posted on by Lost Art Press

Lately I have been getting inquiries, some in hushed tones (whether reverential or consoling I cannot tell), to the effect of, “So, how’s it going with Roubo?” Or, “Are you still working on the French book thing?” And just last week, “I guess Roubo must be dead. Weren’t up to it, huh?” Perhaps Chris has been getting the same communiqués.

Generally I am bewildered by these comments for a minute, mostly because it takes me that minute to realize that these folks are (thankfully) not inside my head, where Monsieur Roubo is never far from the front of the line. Even though I do not blog about it much, fact is I spend a portion of virtually every day working on this mountain peak of a project, which from my perspective is moving along swimmingly. It is not necessarily glamorous at this stage, and it can be brutal work from time to time, but it is moving towards its successful conclusion.

With the exception of the final chapter of our “Volume I, To Make As Perfectly As Possible: Roubo On Marquetry,” Chris has the transliterated-edited-retranslated-redited-reviewed-redited manuscript in hand. Philippe is still grinding his way through the nearly 100-page long chapter on boullework marquetry, and I am putting the finishing touches on some annotations and augmentations to the translated and edited manuscript.

I’m also wrapping up several photo essays wherein I demonstrate some of the processes and tools that Roubo describes, sometimes with less thoroughness than a modern reader might want.

Michele has been the greyhound of our troop, racing ahead with translation on our second volume. She keeps sending me pages and pages of raw transliterations that I simply cannot allow myself to digest because that won’t help us finish our first volume. I’d estimate that at this point she is almost three-quarters through with her initial pass. To avoid reading it in detail right now is truly a feat of self control.

I still hope for the project to enter the publisher/production phase in a couple of months, but I will not be bound by any arbitrary deadline. Excellence is the goal, not urgency. Our dream is to make “To Make as Perfectly As Possible,” well, as perfectly as possible. We have only one chance to get the first iteration right, and we will take whatever time is necessary. We view this as a legacy for the ages, and a few days one way or the other won’t enhance that gift to the future. After this much effort we deserve a product we can be proud of, a product you will find compelling, and a product Roubo would thank us for.

That said, we are still within shooting distance of the schedule we drafted when we started down this path four years ago(!). I will be happy to regale you with developments at the Second Meeting of the Roubo Society at Woodworking in America this coming September and October, and Chris has invited me to join him and John Hoffman at the Lost Art Press booth at that event. There you can browse through my working manuscripts, which will be at the booth.

I do welcome your interest in our project, and invite you to send any questions and encouragements to Lost Art Press, and they will wind their way to me. And if you are at WIA in Cincinnati please stop by to say “Hi.”

By the way, we will be talking about our next Lost Art Press project there. Stay tuned.

– Don Williams

On the Matter of a Hand-tool Magazine

Posted on by Lost Art Press

I’ve received this question about 20 times since June 15 – including from my wife – so I suppose I should deal with it head-on instead of simply demurring.

Is Lost Art Press going to start a hand-tool magazine, whether printed or digital?

The answer? Not right now, at least.

The primary reason I left Popular Woodworking Magazine was because I had so many projects piling up here at Lost Art Press that I estimated it would take me five years of working nights and weekends to tackle them. And that’s just too long a gestation period for books that I consider to be essential to the growth of handwork in the 21st century.

I’m not just talking about the Roubo translation. That itself is a mountain of a publishing project, but that’s only one mountain in an entire range of monumental peaks.

Why have I been quiet on these? Because we are still inking contracts. But you can expect that we will have at least three new products before the end of the year – a DVD I’ll announce next week and two or three books that are unlike anything in print today.

The DVD is from me (sorry!) and is part of “The Anarchist’s Tool Chest.” The other titles are from other authors, people who should have written books long ago.

As we get these projects underway, you’ll hear more about them here. Promise.

Now about that hand-tool magazine: I’ve been in media – and media alone – since 8th grade. I’ve worked in almost every department except advertising, which I would stink at, and circulation, which is a tricky business.

I’ve launched two start-ups in my career – The Kentucky Gazette newspaper and Woodworking Magazine. Both of which are now shuttered. Those failures taught me a lot about what it takes to make a magazine that makes money and makes me want to read it.

1. All your waking hours.
2. A lot of money. And a willingness to lose money for a few years as you pull the magazine onto its feet.
3. A willingness to deal with unethical distribution schemes.
4. A willingness to throw away about 60 to 70 percent of your newsstand copies that don’t sell.
5. A certain level of optimism mixed with stupidity — I call it stupidimism. This trait helps overcome Nos. 2-4.

At this point in my life, I want to spend all my hours producing a hand-tool canon of high-quality books — a foundation that I or others can build upon. I want to get us beyond sharpening, basic plane use and hand joinery.

What’s beyond that? An entire world.

So I guess I’m asking for some patience. After I get this corpus of work complete and the technology catches up with my ideas, I think I’ll be ready to dive into the world of periodicals again. Or there’s always that llama farm.

— Christopher Schwarz

Turning Out the Junk

Posted on by Lost Art Press

“But whenever we clutter up our houses with things we could quite well do without, buying them only because they please a passing fancy, or because our neighbours have them, or because they have become customary, then junk they are.

“For although the industrial world has by this time acquired some rudimentary ideas as to the fittingness of things, its output is continually increasing and its sales propaganda is increasingly directed towards representing non-essentials as necessary to our comfort and well-being.

“And these things can destroy beauty in its very essence by destroying the simplicity of our surroundings.”

— Charles Hayward, The Woodworker, January 1939

A Review from ‘The Unplugged Shop’

Posted on by Lost Art Press

I have never solicited reviews of my work, which is why you’ll never see a blurb on a Lost Art Press Book that reads, “It’s better than ‘Cats!’ I’ll read it again and again.” — Abraham Lincoln.

In this business we have an extremely crude but accurate expression for this sort of marketing tactic – ask me about it over a beer some day. The more polite term is “logrolling.”

Because we don’t roll logs, reviews of our books are more idiosyncratic – they are from readers who bought the book or traded us some cheese for it. But you can bet that the reviews are genuine.

This week, Luke Townsley at the Unplugged Shop wrote a nice review on his site. A brief excerpt:

“Until now, I have been unable to find a discussion on building traditional tool chests that was sufficiently detailed so one could actually adapt it for personal use. Chris Schwarz’ book does just that. And that is really, really important.”

You can read the full review here. The book “The Anarchist’s Tool Chest” is available in our store, as is the T-shirt that goes with the book. It sports the same square debossed on the book’s cover. My wife, Lucy, actually asked to have one of these shirts – a first!

— Christopher Schwarz

Errata and Clarifications for ‘The Anarchist’s Tool Chest’

Posted on by Lost Art Press

I’m finishing up the corrections today to “The Anarchist’s Tool Chest” for the second printing. There are four significant factual errors we’ve corrected, listed below, and three clarifications to the text that might help you through some muddled language on my part.

We also cleaned up about 50 typographical errors. While that’s not terrible for a 120,000-word manuscript, we always strive for zero. Thanks to everyone who helped clean up the text.

Here are the four errors:
Page 122: I discuss how a panel gauge will make a line “perpendicular” to your true edge. It should be “parallel.” (Thanks to Gil Chesbro.)

Page 248: I recommend a 4- or 4.5-point panel saw filed rip. Those don’t really exist. I meant a 7-point panel filed rip. (Thanks to Carl Bilderback.)

Page 270 I discuss a “manmade soft-Arkansas oilstone” that I used to own. It should read “manmade coarse India stone.” (Thanks to Stephen Shepherd.)

Page 430: The drawing shows the dust seal on four sides of the lid; it goes around only three sides. The corrected illustration can be downloaded below. (Thanks to Bob Miller.)

ATC430

Here are the clarifications:
Page 440: The illustrations of the sawtill show some kerfs as not running all the way through. Yet I clearly ran the kerfs for the sawblades all the way through. You can do it either way. Both are traditional and correct.

Page 446: I describe the bottom till as a little “smaller” than the other tills. This is confusing. It is a little smaller in length but it is a little larger in depth.

Page 404: The illustration shows two battens but I show three in the step photos. Either way is fine. Many of the traditional chests have two. Some have three. I tried three, but I drew two.

— Christopher Schwarz