Typically, we don’t accept a shipment of books at Lost Art Press unless there is a tornado in the area – or at least a thunderstorm or torrential rain.
But this morning a truck dropped off the fourth printing of “The Anarchist’s Tool Chest” in my driveway. The sun is shining. My tarps are all put away. My insides are unsettled.
We have now printed 12,000 copies of “The Anarchist’s Tool Chest,” and – thanks to our customers – this book has made quitting my job at Popular Woodworking Magazine an easy transition. So thank you.
We should be getting our shipment of “Mouldings in Practice” next Monday. The forecast shows only a 10 percent chance of rain. Weird.
A quick reminder: Free shipping for “Mouldings in Practice” ends at midnight Wednesday. So if you want to save $6, order before then.
After I built my French-style workbench using dimensional yellow pine in 2005, I tried to acquire a solid slab of hardwood to make a second bench that would be constructed just like the one shown in A.J. Roubo’s “L’art du Menuisier.”
I contacted several sawyers, who all told me I was crazy. I convinced one sawyer to give it a try, but he stopped returning my calls. This part of the story goes on and on, so I won’t bore you. But let’s just say I kept getting abandoned at the altar with me in a shop apron and holding a bouquet of mortise chisels.
Last night I finally got my wish. Thanks to a fellow woodworker, I now have a slab of poplar that measures 6” x 22” x 130” on my back deck. It’s still kinda wet and has some checks on the bark side, but the heart side is solid and almost completely clear.
If the slab remains stable as I finish drying it, I’m going to make a bench that resembles the beasts in Plate 11 of Roubo’s book. As to vises, I think this might be the one to trick out with a Benchcrafted Glide with the company’s forthcoming Criscross parallel guide. I’m not sure about the end vise. I have a Lie-Nielsen improved tail vise sitting in a box in the basement.
What I don’t have yet is a place to put the bench. I think it would look awesome in the front room of the house, but I should start saving up for the marriage counseling and florist bills starting today.
— Christopher Schwarz
P.S. For those of you who don’t read my blog at Popular Woodworking Magazine, you might be interested in this post from yesterday about two changes I’ve made to by 2005 Roubo workbench.
The first time I met Frank Klausz we were both demonstrating at a woodworking show outside Philadelphia. I was flattening boards by hand with a panel plane when Frank walked up, snatched the plane off my bench and walked away.
I stood there like a slack-jawed mouth-breather for a few moments, and then tried to finish up my demonstration.
About 20 minutes later, Frank returned to my bench with my plane. He had taken it apart and polished some corrosion off the chipbreaker. He had eased the sharp corners of the iron with some sandpaper. And he had wiped the entire body with a light coat of oil.
“A craftsman takes care of his tools,” Frank said with a serious look on his face. “No rust. No sap.” Then he gave me a great big smile and walked back to his bench.
That day was a turning point in my relationship with my tools. I stopped looking at them as just a chunk of something that held a pointy bit. Instead, they were something to be cared for, like a pet or a child. Every part of the tool became important, not just the cutter.
Why am I telling you this? Since May I have been on a marathon streak of teaching, and I have dealt with the tools of almost 100 hand-tool woodworkers. And I’ve spent a lot of time removing corrosion, oiling adjustment mechanisms and scraping crud off chipbreakers.
And so here is my brief guide to the care and feeding of tools.
1. Own the fewest number of tools possible. The fewer tools you have, the easier it is to keep them in good shape. Think of tools as cats. Do you really want to be the lady down the street with 63 cats and all the problems that 63 cats have?
2. Have some permanent tool-care products. Get a bottle of oil (any non-drying vegetable oil or light machine oil will do). A rag (I use a micro-fiber cloth, but an old sock is also good). A rust eraser (you need only one – the medium grit is fine). A paint brush for cleaning out the escapements of your planes. An old awl for dislodging fossilized gunk from corners. An old toothbrush for cleaning crap off threads.
3. Every time you take a brief break from your work, wipe the soles of your planes and remove any dust from the escapement and under the bevel. Wipe the dust and pitch off your chisels and saws. Clear any shavings from the mouths of your moulding planes.
4. When you are done for the day, break down your planes. Take apart the iron and chipbreaker, de-crud them and wipe them down. Clean out the mouth of the tool with your brush. Make sure the sole of the plane is clean and undamaged. File or sand off any dings. With your chisels and saws, wipe off all the sap and dust before you put them away. Same goes with your knives, awls, dividers – anything that’s ferrous.
5. Every month or so, oil the adjustment mechanisms of your tools. Students are always amazed at what a drop of oil on the threads can do to improve the way their tools work.
6. Store your tools so they won’t get coated in dust. A tool chest, wall cabinet or Tupperware will do.
7. If you are overwhelmed by all this, go back and read tip No. 1. Or bundle up your naked body in an old housecoat and haul the 50-pound bag of cat food out to fill the buckets on the front porch.
After building a half-dozen versions of The Schoolbox from “The Joiner and Cabinet Maker,” I’m beginning to dial in the design of the small chest to suit my taste.
I am still enamored with the overall proportions and scale of the chest, but I’ve tweaked the decorative details. Here’s a summary of my alterations.
1. Instead of a flat chamfer on the mitered base moulding, I switched to a 3/8” square ovolo. Also instead of mitering the corners, I dovetail them and carve the corners with a chisel.
2. On the lid, I use a cove (made with a No. 6 round) instead of a chamfer. These two changes to the mouldings make the chest look more like a nice piece of furniture than a traveling chest for a kid heading off to boarding school.
3. I’ve not yet found strap hinges that I like that are the right size – the ones I used on the first version are too big. Until I get a blacksmith to make me some, I’ve switched to these gorgeous iron butt hinges from Whitechapel Ltd. They come with great old-school screws.
4. I added two small iron chest lifts. They look nice and make the chest easier to pick up and move. The ones shown on the chest are vintage, but Horton Brasses make lifts that look exactly the same and are the same small size. Click here.
I’ll be building another one of these Schoolboxes at the Marc Adams School of Woodworking Sept. 4-8, so I’ll have another opportunity to try some other changes, perhaps to the dovetail spacing. There are still a couple spots open in the class. More details are here.
