The video we’ve recently released, “Roubo Workbench: By Hand & Power Video,” is intended to be a brain dump from me and Will Myers on building slab workbenches. Not only do we show the techniques we’ve developed to make it doable for the home woodworker, we also seek to dispel a lot of the myths and misdirection encountered by the bench builder.
We take the following topics head-on:
You can use (very) wet wood for the benchtop.
The finish can be simple (or non-existent).
The species you use isn’t all that important.
Moving big slabs doesn’t require a forklift or Roman garrison.
You might not need a tail vise.
The lower stretchers are not very important.
This last detail always makes my bench-building students crazy. They go to great lengths to make the mortise-and-tenon joints between the stretchers and legs massive and tight. While I’ll never bad-mouth a good joint, the stretcher joints are not as important as the joints that join the benchtop and the legs.
Early workbenches didn’t use these stretchers (check out the Stent panel for one good example). In fact, I think the biggest job of the lower stretchers is to make it easier to install a shelf below the benchtop for your bench planes and appliances.
As a result, I don’t think the joints for the stretchers have to be massive. To prove the point we used a Domino XL to make one of the stretcher joints on our bench. I probably wouldn’t use a pocket screw or a biscuit for this joint, but loose tenons are an excellent choice, whether you use a router, drill or Domino.
In fact, some Roman boats were built using loose-tenon joinery, and those seemed to do OK.
‘Hogar Nazareth’ (1627-1681) by Diego Quisepe Tito (q1611-1681). In the Thoma Collection.
In Part II includes more benches and angels, a new painting style, a mystery and a few other things. Get your snacks and drinks ready.
Peru
Peru starts in Cuzco, capital city of the Incas, and with the Quecha painter Diego Quisepe Tito. Tito is considered the most important painter of the Cuzco School, and his work includes at least four scenes of Saint Joseph engaged in woodworking. Although the painting above is dark with age we can see a simple bench without a vise. The background is too dark to see a tool rack, but there are a few tools on the ground.
‘Escenas de la Infancia de Jesus-Hogar de Nazareth’ by Diego Quisepe Tito. Iglesia Parroquial San Senastian, Cuzco. Photo: ARCA.
When Joseph is in the background we usually can’t see much detail about his bench. In this painting it is easy to see there is a face vise with hurricane-shaped nuts on a staked bench. And Joseph is wearing a hat not usually seen on a member of the Holy Family.
‘Hogar en Nazareth’ by Diego Quisepe Tito. Iglesia de San Sebastian, Cuzco. Photo: ARCA.
A staked bench with a planing stop. Look a little closer and on the left side of the bench there is a board held upright by a face vise. A saw hangs on the wall, and I am happy to see a basket of tools.
Last night I tried to find a color photo of this painting and what I found instead was the sad news that the painting was one of 24 lost in a fire at Iglesia de San Sebastian last year.
Left: ‘Sagrada Familia en Nazareth’ (1675?) Diego Quisepe Tito or his circle. Museo Universidad de Turabo. Right: ‘El Taller de Nazareth’ Anon. 18th c. Monasterio Madras Carmelitas, Ayacucho. Photos: ARCA.
Both of these paintings are a copy of a Flemish engraving by the Wierix brothers. On the left, the artist was faithful to the original engraving keeping the toolbox (behind Joseph) and tools on the ground. The artist on the right changed the saw, perhaps copying a saw seen in use at the construction of a new building. He also left out the tool box and most of the tools on the ground. You might have noticed a whole new look to previous paintings. Brighter colors, intricate patterns (with matching birds on the left), gold leaf, native flowers and landscapes.
At the time the above paintings were done the Spanish had been colonizing the Americas for well over a century. A style of painting evolved in Cuzco when, in the late 17th century, Spanish-born and mestizo artists split away from the Amerindian artists of the painting guild. This freed the indigenous painters to incorporate colors and patterns from their cultures into copies of European art. It is thought Diego Quisepe Tito helped lead this effort that is now known as the Cusquena-style of painting.
‘El Taller Nazaret’ (1722), Anon. Monasterio de Santa Catalina, Arequipa. Photo: ARCA.
A nice sturdy bench with stout legs. Only the axe is left on the ground. The chisels are nicely arranged in a basket with the divider used as a…divider! I think the artist may have given the bench such a great length in order to fill the lunette.
‘Taller de San Jose’ 18th c. Anon. Museo National de la Cultura Peruana.
A staked bench with somewhat wonky legs, a parrot and Jesus at sawyer duty. Another trait of the Cusquena style you may have noticed is a lack of perspective.
If some, or many, of the colonial paintings seem familiar it is because of the use of a large set of engravings the Jesuits brought to the Americas to use in converting the indigenous peoples to Christianity. In the mid-16th century the founder of the Jesuits commissioned a series of engravings on the life of Christ from the Wierix brothers, well-known and prolific Flemish engravers. The commission was given in the mid-16th century by the founder of the Jesuits. The engravings were used in Jesuit conversions in their missions in the Americas and Asia.
The next three paintings are copies of Wierix engravings and show other woodworking scenes.
‘Techando la Casa de Nazareth’ (1670), Diego Quisepe Tito. Iglesia de San Sebastian, Cuzco. Photo: PESSCA.
Joseph’s low staked bench sits at the bottom of a substantial gangway-type ladder.
‘Joven Carpintero’ 17th c. Anon. Museo Pedro de Osma, Lima. Photo: ARCA.
Joseph, Jesus and the angels are building a lattice for the garden. The usual assortment of tools are tossed about.
‘La Baracaza’ 18th c. Anon. Museo del Palacio Arzobispal, Lima. Photo: ARCA.
Joseph is driving trennels into the boat.
The gallery has one more Wierix-related painting, two vistas and a map.
Bolivia
During the colonial era Bolivia was known as Alto Peru.
Vista of Potosi, 1758 by Gaspar Miguel del Barrio. Museo Charcas.
The silver mines of Potosi helped drive the trade with Asia and filled the coffers of Spain. During the height of its mining production Potosi was the wealthiest city in the Americas.
‘La Sagrada Familia en el Taller de Nazareth’ (1689-1732) by Melchor Perez de Holguin (1660-1732).
Melchor Perez de Holguin was a mestizo and the dominant painter in Potosi into the 1720s. Although the Cusquana style of painting was found in Alto Peru, de Holguin’s work falls into the Potosi school and was heavily influenced by the Spanish artist Zurbaran.
Joseph’s bench is much like those seen in other paintings from Peru and representative of all the benches I’ve found for Bolivia.
Although his workshop is in the background the painter did not stint on detail. The bench is staked with tapered legs. The plane is put aside while Joseph uses a chisel. His adze sits on the near end of the workbench. On the wall is a tool rack and on the floor another full set of tools.
I almost left out the next painting but something must have held me back.
‘La Casa en Nazaret’ late 18th c. Anon. Collection of Roberta & Richard Huber.
It was the curvy legs (with stretchers!) and ornate plane. They were just too good to pass up.
‘El Taller de Nazareth’ 17th c. Anon. Private collection. Photo: ARCA.
This work is from La Paz. The bench is staked, has a planing stop and a face vise. There is a nice collection of tools even if they are all over the floor. OK, OK, if they were piled into a basket we wouldn’t be able to see them in such nice detail.
‘The Carpenter’s Shop in Nazareth’ late 18th c. Anon. Brooklyn Museum.
Because the painting is so dark the Brooklyn Museum provides a black and white copy to better see this frenetic workshop.
With non-winged personnel this may be a good representation of a colonial workshop cranking out furniture, doors and fittings for the non-stop construction of churches, private residences and governments buildings. There are two workbenches, both with face vises and a mystery.
Close-up shot of the bench in the middle of the painting. The white squares may be the vise screws (only this bench has these). But what are those mysterious things at each end of the vise? After much deep thought Chris surmised “rocks on strings.”
‘Taller de la Sagrada Familia’ 18th c. Anon. Location is Copacabana. Photo: ARCA.
Despite the camera flash there is a staked bench with a face vise.
Isolating the bench shows, unlike others, the face vise does not extend the length of the bench.
‘The Sagrada Familia y San Juanito’ 17th c. Anon. Photo: Jose Antonio Camara, Antiquarian, Madrid.
This painting is spectacular in its detail: the wood grain on the board held by Joseph, Mary’s sewing cushion with thimbles in one pocket and thread in the other, the cat under the table playing with a spool of thread and the scissors in the basket at Mary’s feet. Joseph works on a staked bench and behind him tools are arranged neatly on a rack.
You may have seen this image on Chris’ other blog. When I sent the image to him a few weeks ago he got a little crazy over the “doe’s foot” planing stop. Readers of this blog will recognize the planing stop as, ahem, the palm or ban qi, which originated in China. You can read the origin story of the palm here. The blog about the modern version of palm or ban qi can be found here.
The palm can hold a wide flat board in place on the bench or a board held on edge, and both without leaving a mark. So how did a bench appliance of Chinese origin get to 17th-century Alto Peru? The same way Asian workers and goods arrived: the Manila Galleons which sailed between Acapulco and Manila from 1565 to 1815. The palm is just one example of the early arrival of Asian techniques in the Americas.
You might be wondering who is that woman in the doorway, the one who has drawn the attention of the Holy Family. She holds a basin containing the Arma Christ, symbols of the Passion of Christ. In a European painting the woman might be Saint Ann, the mother of Mary. In this painting I believe she is Mama Ocllo, a mother figure from Inca legend who gave women the knowledge of spinning thread and weaving textiles. This is another example of Amerindian painters integrating their culture into Christian religious works.
The illustration is from “El primer nueva cronica y buen gobierno,” a publication from 1615 in the collection of the Royal Danish Library.
Argentina
I found only one workbench-related painting from Argentina.
The painting is from Cordoba and titled ‘El Hogar de Nazaret’ from 1609 by Juan Bautista Daniel (1585-1662). The bench is staked with a try plane resting at the far end. Most of the tools hang in a rack or on the wall.
The painting has long been in a private collection and this seems to be the only photograph available. The odd thing about it is Daniel is identified as a Dane in a plaque at the center-right edge of the painting. It turns out he was from Norway and arrived in the territory now known as Argentina in 1606. He made his way to Cordoba where he was granted permission to live and work.
Paraguay
The last stop on this Latin American tour is at Santa Rosa, one of the Jesuit missions in Paraguay known as “reducciones de indios.” It is also my favorite of all the Latin American paintings.
Photo by Fernando Allen Galiano on Portal Guarani.
The fresco is by an unknown artist and is in a corner of the Chapel of Our Lady of Loreto at the former Santa Rosa mission. The mission was founded in 1698 and populated by the indigenous Guarani people. When the Jesuits were forced out in 1767 the missions were deserted and most fell into ruin.
The fresco frames the Holy Family with two columns. Joseph is using a chisel and maul to make cuts on a panel for eight-point star inlays. The middle figure is Jesus sawing (ignore the splotch that looks like a wing), and on the end is Mary. In all the other paintings where we see Joseph with a chisel his action in generic. Is he chopping a mortise or carving? We don’t know. Here, we can see what Joseph is making.
The fresco is first of all an important document in the history of the Guarani. Second, it illustrates a craft that is an important element of colonial design.
Geometric designs were not new to the indigenous peoples of the Americas. Pre-conquest, geometric shapes were used in stonework, metal, textiles and pottery.
The stars, sun and moon were observed and recorded by many indigenous groups. Stars as a symbol, particularly eight-point stars, are found in many cultures. It is part of the Moorish influence in Spanish art and architecture, and in Christianity it is a symbol of redemption or baptism and is also a symbol of Jerusalem. For a sailor an eight-point star is a compass rose or wind rose.
On the left is part of a folio from the 8th century ‘Beato de Liebano’ and on the right Mary’s gown in a Cuzco School painting.
The eight-point star was used extensively as wood, mother of pearl and metal inlays in furniture during the colonial era. The examples above are from chests, armoires and tables made in various parts of the colonial territories. The black ceiling with red stars is the ceiling of the fresco chapel (in some grand European cathedrals the ceilings are painted blue with gold stars).
So, from a humble fresco in a small chapel that somehow survived for over 300 years we learn quite a lot.
To wrap-up this survey of workbenches I think the staked bench (high or low) with a planing stop and maybe a face vise is the type of bench that was most often used in the colonial era. The painters were not working in a vacuum and only copying scenes from European engravings and paintings. They observed carpenters that arrived from Spain and the benches they built and used, benches that could be adapted for different construction needs. Also, some of the first secular paintings, the Casta paintings from Mexico, were not copies of European paintings and show this type of staked bench.
A Quick Tour of Tool Storage
You have seen tools on the ground, on the floor, in racks and shelves on the wall and stowed in baskets. All of these methods, or non-storage in the case of floor/ground, can be seen in European paintings. How did the woodworkers in the colonial era store there tools? Spanish-born carpenters probably brought their tools in small chests or wrapped in bags. Using baskets would also be a familiar method of storage.
Making baskets was a well-known craft in the New World. In the wedding scene above from the Codex Mendoza, an Aztec document from 1535, there are woven mats and a basket.
This lidded basket is from the pre-Inca Chancay society and dated 12th to 14th century (British Museum). It holds yarns and tools used by a weaver.
If you had a small collection of tools and needed a tough but lightweight storage and carrying solution, a basket would certainly fit the bill.
There is one other solution and possible only with the help of the angels: the sky rack.
Researcher Suzanne Ellison recently turned up this unusual Spanish split-top workbench that resides in the Museo Ángel Orensanz y Artes del Serrablo. It’s remarkable to find an early split-top bench (which were quite unusual until recently, thanks to Mike Siemsen and Benchcrafted). But the configuration of the benchtop is enough to make you your scratch your head a bit.
Each top is 18 x 14 cm (7” wide x 5-1/2” thick) and are separated by a gap that is 8-1/4” wide. The two tops are joined with two crossbars that are through-tenoned into the tops. The four legs are tenoned into the tops and there is an unusual leg vise (four handles!) that drives a chop that is 58 x 20 cm (22-3/4 x 7-7/8” wide).
The bench overall is 70 cm x 230 cm x 57 cm (27-1/2” high x 90-1/2” long x 22-1/2” deep). The museum obtained the bench in the early 1980s but does not list an approximate age of the bench.
My first reaction to this bench was that perhaps it was for another trade or a specialized purpose, though the museum lists it as a carpenter’s bench. But the more I thought about the bench, the more I think it was used for carpentry or furniture.
The bench is a standard size for a woodworking bench. The vise is clearly set up for woodworking, despite the unusual handles on the screw. There appears to be a holdfast in the rear top. And there are holdfast holes in the front right leg, suggesting the bench was used for edge jointing.
The square block sitting on the top of the bench is a bit of a mystery. It could be a mallet in dog hole, some jig or something else.
If I were forced to speculate, my guess is this was a bench used for woodworking where the owner didn’t deal with stock that was both thin and wide. Of course, the gap between the two tops could have been filled in by a chunk of timber at some point or a tool tray or any number of other things.
‘La familia en el taller de Jose’ end of 17th c., Anon. Photo: Morton Casa de Subastas.
While searching for examples of lowrider (Roman-type) workbenches for Chris, I started to find images of workbenches from the Spanish Colonial era in Mexico and South America. As this is a field that is underrepresented, Chris and I thought it would be a good idea to assemble them for study. I found woodworking images from seven countries, with the majority from the early 17th through late 18th centuries.
Except for a very few, the majority of Spanish Colonial images are of religious scenes. In Europe, the shift from religious to secular images occurred earlier, but in the Spanish-controlled lands religious orders of the Catholic Church set up craft guilds for the converted indigenous peoples, and controlled much of the production of painting and other arts until the 19th century.
Paintings from Spain were used to communicate religious ideas and also served initially as examples to copy. And many copies were needed as churches were erected in every settlement, and new arrivals from Spain built new homes. In a twist that did not occur in North American, the Amerindians in Spanish-controlled territories began to infuse elements of their ancient cultures into the art they produced.
Along with workbenches, you will also see the basic tool kit in use, some sawing, angels and a few cats.
Mexico
In the image at the top (lightened to see detail) Joseph is using an adze at a simple staked bench. Note the cabinet in the upper left corner with the basket of tools and two planes. You will not see all of Joseph’s workshops so neat and organized. And there is a parrot.
The painting above shows a simple bench with a substantial top and stretchers. A wall cabinet with a door is somewhat unusual in colonial paintings. Jesus has contrived a support for sawing on his own, no angels needed. This painting is probably a close copy of a European painting.
‘La Sagrada Familia en el taller de Nazareth’ 17th c. (?). Location unknown. Photo: ARCA.
The painting above is from Oaxaca. Joseph and Jesus use a low and very long bench to support their sawing. There is a tool rack on the back wall and strewn about the floor are a selection of planes, chisels, an adze, square and mallet. It looks like Joseph is using his leg and a short bench as an additional support for the piece they are sawing.
In Mexico in the 18th century a type of secular paintings were made to illustrate a complicated and legal caste system. Very briefly: with a population of Iberian Spanish, colonial-born Spanish, Amerindians and Africans there were bound to be intermingling; racial mixtures were used to determined levels of status. Casta (caste) paintings generally illustrated 16 mixtures.
In the secular trinity above we have a nice example of the staked bench, although a bit higher than Chris would like, and a small selection of tools.
Casta painting by Francesco Clapera (1746-1810). Denver Art Museum.
Of the hundreds of Casta painting I looked at most of the craftsmen were shoemakers, so I was surprised to find some carpenters. With adze in hand he works the wood supported by his bench and child.
It is highly likely some of the workbenches are exact copies of benches in European paintings. As more immigrants and members of religious orders arrived, more paintings and other artwork was available to copy. However, I think the Casta paintings and paintings from missions point to the type of bench most commonly built and used in mission shops and by craftsmen working in city shops.
The Spanish-controlled lands in the new world became part of a global trade network that extended from Spain to Asia. Via “La Nao de la China,” otherwise known as the Manilla Galleon, precious metals found in the New World, especially silver, were transported to Manila to trade with Chinese merchants.
The route of La Noa de la China.
The Manilla Galleons ran from 1565-1815 and ultimately completed two voyages a year using the largest ships in the world. The goods from Asia landed in Acapulco with some distribution in the New World. The bulk was moved over land to the Atlantic Ocean and thence to Spain. The human cargo consisted of slaves and freeman and with them the colonies were exposed to new materials, methods and influences.
Top: ‘La Anunciacion’ from Balclis Auctions, Barcelona. Bottom: ‘San Jose ante Maria’ Museo America, Madrid. Both 17th centrury.
One example is the use of mother of pearl for inlay (a craft the Japanese had perfected) which became known as enconchada. In paintings it was generously used to impart a richness to the subject. In dim churches and homes, the garments of Mary and Joseph, angel’s wings and the embellishments around doors and windows would glimmer and glow.
Back to the benches. Similar low staked benches, one with stretchers. On the left there is the not-recommended tool storage above the dishes. On the right, we have a sensible woodworker with only a gluepot (?) and a smaller saw on the shelf and a nice basket o’tools.
In the Mexico gallery there is a painting with bench that may be a reproduction, more glowing, some polychrome sawing and a vista. Click on each image for a description.
To wrap up Mexico here is a 19th century bench of a master carpenter.
The legs look like they have been replaced. The bench is 228 cm long and 127 cm wide. Chris commented that he suspects the face vise screws are so long to accommodate sawing pieces for veneering. My contribution is to name the nuts “double-bunny ears.”
Colombia
‘El taller de San Jose’ first half 17th c. Anon. Colecciones Parroquia de Egipto, Bogata. Photo: benrepubcultural.org
Flemish paintings brought to the colonies introduced the idea of spiritual scenes warmed with details of domestic life. This is very likely a close copy of a European painting.
Jesus is a bit older and has his own bench. Both benchtops seem to have holes for pegs (or a holdfast) to use for work holding.
The right leg on Joseph’s bench seems to have holes and perhaps a holdfast.
‘Hogar de Nazareth o Trinidad doble’ 17th c. Anon. Private collection.
This painting is from Medellin. The staked bench has a substantial top and legs. Tool collection on the ground and a cat.
‘Sagrada Familia’ (1657-1710). Gregorio Vasquez de Arca y Ceballos. Iglesia San Ignacio, Bogota. Photo: ARCA.
Nice heavy bench top and a face vise with indeterminate nuts.
‘Hogsr de Nazareth’ 17th c. (?). Anon. Private collection. Photo: ARCA.
Staked bench with a very skimpy top and wonky legs, but you get the idea. The same set of tools strewn about. Baby Jesus is not using a safe chiseling method.
‘San Jose en el taller’ 18th c. Convento de Santa Ines, Bogota. Photo: ARCA.
I add subtitles to images in my notes to remember which is which. This one is, “Get that baby off that bench!” But, we are back to the long and narrow staked bench. Demerits for the Baby Jesus on the bench (with chisel), merits for using a basket for tool storage.
‘San Jose carpintero’ 18th c.(?). Anon. Museo de Arte Religioso, Duitama.
Chisels in a rack on the wall, squares, planes, mallet, and saw on the floor. Dividers and adze on the bench. Bench more than a bit too high for its legs. Wait! What is that NOTCH on the front edge of the benchtop? I can’t repeat the exclamatory phrase Chris used when I sent this image to him. I believe this bench joins the Roman Saalburg workbenches in Workbench Mystery No. 326 (read that post here).
The Colombia gallery has two more benches and a vista.
Ecuador
‘Hogar de Nazaret’ 2nd half of 17th c. Isabel de Santiago (1660?-1714). Museo Jijon Caamano, Quito.
Isabel de Santiago was the daughter of a well-known painter. Using her will, and other documentation, it was determined she had painted several paintings attributed to her father. Of course, the re-attribution occurred a few centuries after she died.
Joseph is about to strike a chisel with his mallet. An angel with dividers in one hand and a square in the other works alongside Joseph. The bench is similar to others earlier in the post with the addition of a cat and dog.
‘Teller de San Jose’ 18th c. Miguel de Samaniego (1767-1824). Museo del Banco Central de Ecuador, Quito. Photo: ARCO.
I had almost given up on finding a clear and uncropped image of this painting.* The bench has a face vise with hurricane nuts. There is a tool rack on the wall and minimal tossing of tools to the ground. The painter, Miguel de Samaniego, a mestizo, is considered one of the premier painters in Ecuador’s colonial era. He clearly had a sense of humor.
He gave Joseph a plethora of shop angels: naked angels are ripping, but who is supporting the other end of the wood? Joseph’s leg? The clean-up crew is busy. The chickens are being fed. Over at the soup pot, one angel blows air to stoke the fire while another suffers from smoke inhalation. And under the bench we have a spoon carver.
‘Taller de Nazaret’ 18th c. Anon. Convento de San Francisco, Quito. Photo: ARCO.
A staked bench with no face vise. Just as Joseph is about to bring his adze down, his helper angel puts finger to lips in the international sign of “Shhh” and points to the sleeping Jesus.
In the Ecuador gallery there is another painting by Isabel de Santiago (Joseph and bench are in the background), from the coastal city of Guayaquil a painting of Joseph with his tools and two vistas.
*A big thank you to Jaime H. Borja Gomez and his ARCA project. I was able to find missing information and better photos of previously found paintings, and many more images I would not have otherwise found.
I hope to have the next post up in a few days and it will cover Peru, Bolivia, Paraguay and Argentina.
You can now purchase our latest video “Roubo Workbench: By Hand & Power” for $35 through our online store. The 4:19-long video can be streamed or downloaded and played on nearly any device – we offer the video without any DRM or copy protection.
The video is an in-depth look at how to build a massive French workbench using giant slabs of wood, but without enormous machinery. Will Myers and I walk you through all the construction steps and show a variety of ways to perform every operation, from a pure hand-tool method to one that uses the latest hand-held power tools.
Along the way, Will and I debate the fine points of construction – we don’t always agree – and discuss the pros and cons of everything from wide benchtops to wet timbers to tail vises.
Oh, and I might add that the video is beautiful. Shot using a three-camera setup at F+W Media and directed by our own John Hoffman, this presentation is the best we could do without hiring Orson Wells.
In addition to the 4:19-long video, we also include a three-page pdf containing a construction drawing of the bench, a cutting list and a list of the suppliers mentioned in the video. You’ll also receive a sheet of timecodes that will allow you to skip easily to individual chapters.
This video is the start of a series of instructional videos from Lost Art Press and directed by John. Next up: Peter Galbert on turning.
