Typically when we announce an open house I get three or four complaints along the lines of “why didn’t you let us know sooner.” So for those three or four people:
The 2023 Summer Open House at the Lost Art Press storefront is on July 29. We’ll open the doors at 10 a.m. and lock them behind you at 5 p.m. We will probably have a special gift, guest demonstrations, etc. But I don’t know anything more than the date at this point. (And we will of course let you know more when we figure it out.)
An assortment of JP chairs built between 1880 and 1900.
If you’re a vernacular furniture fanatic, or you live in Tasmania, you may already know what a Jimmy Possum chair is. If you’re one of the other 7.4 billion people on earth, buckle up and read on about my journey to Jimmy Possum: an unbroken tradition.
A mob of wallabies on the roadside near the chairmaking class.
With international borders reopened, wanderlust took my wife, Kathy, and me to the farthest reaches of Earth (for us): Tasmania. We landed in Hobart on a dark, rainy December night. After picking up our diesel 4-wheel-drive rental, we set off into the rural part of the main island. Using all my skill and every last ounce milliliter of focus, I narrowly avoided the mobs of wallabies zig-zagging through the country roads.
Chairmaking class started the next morning when Stanley, the shop dog, dragged us out of bed. Jon Grant teaches a number of American Windsor chair classes in Melbourne, but if you ever get the chance, building a chair with him at his home studio in Tassie is a one-of-a-kind experience in one of the most uniquely beautiful places on earth. Being half a world away from the States, Jon and I agreed that it would make more sense for us to build a Tasmanian chair.
Left to right in Jon’s studio: My Peddle chair, me and an original Peddle chair built circa 1900.
The George Peddle chair came to prominence around the same time as the Jimmy Possum (“JP”) chair, but in a different part of Tasmania and for a different purpose. If you looked at the photo above and thought “Hey! That’s not a stick chair,” hold your (shave)horses, we’re almost to that part.
I learned a number of things in Jon’s studio, including (but not limited to):
1. How to turn wood 2. Tasmanian blackwood is beautiful 3. Wallaby patties are delicious 4. There’s an ongoing JP chair exhibit in Launceston.
If someone asked me what a JP chair looks like, I’d say it looks almost like the love child of an Adirondack lounge chair and an Irish stick chair. If someone asked me how to pronounce Launceston, I’d probably just embarrass myself.
If you do an internet search for “Jimmy Possum,” you’ll readily find the legend of the man himself. For the purposes of this post, it’s sufficient to know that:
1. He was not a possum or a professionally trained chairmaker 2. The JP chairmaking tradition is alive and well. In the 35 minutes I had at the exhibit before speeding to the airport, here’s what I saw.
The Legs The defining characteristic of the JP chair is the fancy leg design. The four legs suspend the seat, pass through it, and support the arms to boot. The lack of stretchers, combined with the rake, creates a lot of negative space under the chair, highlighting the smooth, shapely legs. If you’re planning to build one yourself, make sure that leg grain is straight!
Pinned and wedged JP chair built from blue gum circa 1895
The Joinery It’s not obvious at first glance, but this chair has more pins than granny’s sewing kit. Legs meet seat? Pins. Legs meet arms? Pins. Sticks meet seat? Pins. Sticks meet crest? Pins. You get the idea.
Many of the arms and crests are secured with a “belt and suspenders” approach, having both pins and wedges, but the curiosities don’t end there. A number of JP chairs sport through-tenons with just pins, no wedges. The early JP chairmakers lived in or around small farming settlements, so I suspect the chairs were built using techniques the makers knew from their trades.
We all make mistakes! Six legs, doubled arms, and a warped seat. Built circa 1890.
The Seat Many of the seats are a single board, and a lot of them appear to be rived. These days, people rarely build chairs using green wood seats, and you can see why in the photo above. On the other hand, most of these 100-year-old leg-to-seat joints are fantastically tight from the green seat drying and shrinking around the leg.
A massive JP chair displayed next to a JP highchair, both built circa 1895.
Know Your Neighbor It may be difficult to tell from the photos, but the chairs range drastically in size. To me, this suggests that most of these chairs were made for friends, family, the maker themselves, or by commission, rather than as spec chairs. This isn’t surprising, given that the town of Deloraine (where JP chairs are believed to have originated) had a population of 836 as of the 1881 census.
All Rake, No Splay If you hate resultant angles (sorry Chris), this is the chair for you! The nature of the floor-to-arm legs prevents the chair from having any splay. If you’re having trouble visualizing it, draw a JP chair with splayed legs, then try to figure out where you’d sit.
A selection of chairs built circa 1900.
The Similarities Despite being on the other side of the world, parts of these chairs have some similarities to historical vernacular chairs from the northern hemisphere:
• The front edge of many seats is natural, not cut, creating a bevel. • The seats are not saddled. • The arms intersect the outermost back sticks, similar to an Irish stick chair. • They were made from local timber, then (in many cases) painted green.
All coincidence? Unlikely. In 1870, just more than 40 percent of the population of Tasmania was made up of immigrants. Some were gold miners from China and mainland Australia, but the majority were from the U.K. (which at the time included all of Ireland).
I find the JP chairs beautiful, but also meaningful. They began popping up around 1870 (or perhaps a little earlier), only a few decades after colonists settled in Tasmania. Most of the early years were likely spent fighting the native Palawa people, figuring out how to eat the local plants, farming in unfamiliar soil and generally struggling to find a way of life. The early Europeans sent to Tasmania were primarily convicts, but not the murder-y kind. They were guilty of “petty crimes” like stealing bread, committing fraud or sharing political opinions. I like to think of JP chairs as a sign of life improving for the settlers – early evidence of leisure activities.
The JP chair is a form of folk art and has a healthy bit of tradition associated with it. I’ve never spoken directly with any of the families who have been making JP chairs continuously for more than 100 years, but I suspect they’d tell you not to touch a lathe. Historically, a drawknife is used to shape the Tasmanian Blackwood legs and spindles.
There’s a lot to learn from building a traditional form the “right” way, but I also have a habit of doing things my own way, so I’ve decided to build two chairs. I don’t have access to green wood, so I’ll start by setting aside a large chunk of kiln-dried ash to Galbertize*. While that’s marinating, I’ll get to work making an “Amurican” version from walnut using handplanes and a scorp. Maybe I’ll even add stretchers, like the Obnoxious Yank that I am.
Tree ferns surrounding Tasmania’s Russell Falls.
If you have the chance, go check out the JP exhibit before it ends in May. If you can’t get there in time, renew that passport and go to Tasmania anyway. You’ll see, among other things, some incredibly humbling trees.
– Lewis Laskin
* Galbertization: Pete Galbert lays out a method for rehydrating kiln-dried wood to be worked with a drawknife in his “Chairmaker’s Notebook.”
Bonus Content: Before today, this next piece of knowledge was only available to those who live in or road trip through Australia. The local market price of a Bag O’ Poo ranges from $2 to $4 USD, depending on provenance (sheep, horse, or cow), size of the bag, and currency exchange rate.
Fig 4.1 Learn to chop mortises accurately and efficiently and you’ll be able to build most anything. Joint stools will give you lots of practice – there are 16 joints in each one.
The following is excerpted from Chapter 4 of “Make a Joint Stool from a Tree,” by Jennie Alexander and Peter Follansbee.
Joint stools are a fascinating piece of British and early American furniture. Made from riven – not sawn – oak, their legs are typically turned and angled. The aprons and stretchers are joined to the legs using drawbored mortise-and-tenon joints, no glue. And the seat is pegged to the frame below. Because of these characteristics, the stools are an excellent introduction to the following skills.
• Selecting the right tools: Many of the tools of the 17th century are similar to modern hand tools – you just need fewer of them. “Make a Joint Stool from a Tree” introduces you to the very basic kit you need to begin.
• Processing green oak: Split an oak using simple tools, rive the bolts into usable stock and dry it to a workable moisture content.
• Joinery and mouldings: Learn to cut mortises and tenons by hand, including the tricks to ensure a tight fit at the shoulder of the joint. Make mouldings using shop-made scratch stocks – no moulding planes required.
• Turning: Though some joint stools were decorated with simple chamfers and chisel-cut details, many were turned. Learn the handful of tools and moves you need to turn period-appropriate details.
• Drawboring: Joint stools are surprisingly durable articles of furniture. Why? The drawbored mortise-and-tenon joint. This mechanical joint is rarely used in contemporary furniture. Alexander and Follansbee lift the veil on this technique and demonstrate the steps to ensure your joint stool will last 400 years or so.
• Finishing: Many joint stools were finished originally with paint. You can make your own using pigments and linseed oil. The right finish adds a translucent glow that no gallon of latex can ever provide.
Now we can return to the framing parts, starting with the stiles. The first step is to lay out the mortises. We’ll outline these steps one at a time because it can get confusing. We will call the mortises for the front and rear rails “straight” mortises, those for the canted ends of the stool we will call “angled” mortises.
Stack the four stiles together, with their beveled inside corners touching, and with radial faces up.
These radial faces become the “front” and “back” faces of the stool. Take one stile, and work on its radial face.
Fig. 4.2 This story stick is another example of something for which we lack period evidence; but its effectiveness can’t be beat. In addition to serving as the principal layout reference, it functions as a wooden notebook. If you make a number of different stool patterns, mark them with the date.
To lay out the stiles’ square blocks and the straight mortises, it’s easier to use what a carpenter now calls a “story stick” that is marked with the stiles’ details, rather than working from paper drawings or patterns. This shop-made stick records the markings that are then transferred to the stile. We have made these sticks to record different stools. The locations and heights of the squared blocks, turning details and positions of mortises can all be taken from the stick to the stile. It is best to mark ONE stile from the stick, then the other three stiles from that first stile.
Make sure the foot of the stile is trimmed square. Line up the foot of the story stick and the feet of the stile. With an awl, mark the limits of the square blocks and scribe these marks across all four faces of the stile, with one exception – the top of the stile is marked only on the radial face and the corresponding inside tangential face (where the straight apron mortise is located).
Now line the stick up on the inside face and mark the locations of the mortises on this tangential face.
Fig. 4.3 Prick the points with the awl, then scribe them with the square and awl. Sharpen the awl with a file from time to time. Careful, it can draw blood when it’s sharp.
One thing to keep in mind is that the top of the apron mortise is not at the same height as the top of the stile. This mortise drops down about 3/4″ from the stile’s top end. Eyeball the top of the apron mortise and scribe it with the awl and square.
The next step is to mark the mortises with the mortise gauge. To set the gauge, make a mark with your chisel’s edge perpendicular to, but right against the stile’s arris. Next, move over one chisel width and bear down hard enough to make a mark in the wood. Then set the pins of your mortise gauge according to the location of this second chisel mark. The result is a mortise that is set in from the face of the stock the thickness of the chisel. Our mortises are usually 5/16″, set in from the face 5/16″. This spacing is based on studies of period work; 5/16″ is almost a standard from what we have seen.
Fig. 4.4 (left) This is a technique that if we heard it somewhere, we have forgotten where. It works very well. No ruler, no fiddling with the gauge up against the chisel’s sharp edge. Mark the timber with the chisel, then put the chisel down. Very safe and simple. Fig. 4.5 (right) Now move the chisel over one chisel-width. And lean on it. Now your setting is marked on the timber, and you just need to set the mortise gauge according to the chisel marks.
Fig. 4.6 Using both hands on a marking or mortise gauge might seem like overkill, but the oak is very fibrous, and when it’s green it can catch the gauge’s pins. The result can be irregular and it’s hard to re-mark a line once it goes astray. Extend the marking lines beyond the top and bottom of the mortise; this way you can check the spacing of the joint if you find you need to reset your gauge – if, for instance, it falls on the floor.
The Angled Mortises To find the location for the angled side mortises, use an adjustable bevel set to the desired flare angle. A slope of 1:6 is what we have used on several stools. Our studies of 17th-century stools show flare angles right around that figure, some less, none more. To set the bevel, set a straightedge on a framing square, positioning it at 1″ on one leg, and 6″ on the other. Then adjust the bevel to this angle and lock its nut to secure the setting. You can then scribe this angle on a piece of wood, or even scribe it on the wall. Like the adjustable gauges, the bevel can lose its setting if bumped. Having the angle scribed somewhere makes it easy to reset it. Alexander turned an adjustable bevel into a fixed one by threading a bolt through its stock and blade.
To lay out the side mortises, you must carry the line that designates the top of the stool from the front radial face across the side tangential face. Set the bevel with its handle on the front face of the stile. Line it up with the marked top of the stool, with its angled blade pointing upwards on the other outside face of that stile. Scribe this line with the awl.
Fig. 4.7 (left) Here is an adjustable bevel, and the modified one Alexander turned into a fixed bevel. If you are using one flare angle regularly, this is the way to go. It’s easy enough to come up with an extra adjustable bevel. Fig. 4.8 (right) Marking this angle is the same as any layout; a couple light passes will carefully scribe a line on the stile. We have often joked that this step requires two consecutive thoughts. It might be three.
Then use a square to carry this line across the other inside face. So the sequence is square, bevel, square. Remember that it’s best to carry the lines across the outside faces; the inside faces are unreliable. This layout is both simple and complicated at the same time. Sometimes it helps to stand the stile up and tilt it as it will be in the finished stool. Then you can easily visualize where the angled mortises are and how they rise up higher than the straight mortises.
You can repeat this process for the top edge of the stretchers’ mortises. Or you can mark this from the story stick, this time lining up the top of the stool with the scribed line that designates the top of the side apron.
Now mark the mortises’ height and width on these faces of the stile. After you mark out two stiles, lay them side by side and check that they agree. A front or rear pair should have their radial faces matching, with the straight mortises aiming at each other, and the side, angled mortises rising up toward the top of the stool.
Mortising Once you have struck the layout of the mortises, secure the stile on the benchtop near its edge. Shove one end of the stile against the bench hook then secure the stile with the holdfast.
Fig. 4.9 (left) This is the first pair of blows with the mortise chisel. Note the chisel’s bevel is just about plumb. Fig. 4.10 (right) Here, the stile is held in place by a holdfast, with a scrap of pine between the holdfast’s “pad” and the stile. This prevents bruising the stock.
Begin mortising by holding the mortise chisel with the handle tilted away from you, leaving its bevel just about plumb. Position the first cuts with the mortise chisel about in the center of the mortise’s length. A blow from the wooden mallet drives the chisel downward. Turn the chisel around, and make another chop aimed at the first. The result is a V-shaped opening at the middle of the mortise’s length. Alternate the chisel’s position in this way, enlarging the V-shaped cut; the goal is to reach the depth at the center of the mortise as quickly as possible. Then the rest of the work is just cutting down the end grain to lengthen the mortise. As you get to the ends of the mortise, bring the chisel upright so that its back surface is perpendicular to the stile’s surface.
Fig. 4.11 (left) Coming at the mortise first this way, then that way requires some shift in posture. Experiment with different methods to see what feels best. The idea is to get the mortise chopped quickly and easily. Fig. 4.12 (right) The amount of work that is split between hand pressure and mallet-driven will vary. Moisture content plays a role in this; drier stock is less forgiving with hand pressure. But either way, oak will convince you to use your whole body.
There are a few stances and postures we use that increase the efficiency in mortising. For most of the work the chisel is driven with a mallet, but sometimes hand pressure is useful as well. When using hand pressure, it helps if you rise onto the balls of your feet and come down with your whole body to drive the chisel. Lean on the top of the chisel handle with the front of your shoulder to help drive the tool into the wood. Then you can pry the waste up from the bottom of the mortise. In fig. 4.12, the left hand is used to position the chisel, and the right hand and upper body are driving the tool into the wood.
It is critical to keep the mortise chisel parallel to the face of the stile. You can sight against a square positioned on the benchtop. Drive the chisel into the mortise, then step back and sight it against the blade of the square. With practice you will learn to sight this against the face of the stile, and not need the square.
Fig. 4.13 A nice stout mortise chisel is essential when prying the material out of the mortise.
The moisture content of the oak is important at this stage; usually it’s fairly wet inside when you chop these joints. The stock in the photos was planed wet from the log less than a month before cutting these joints. The straight-grained nature of the riven stock makes mortising easier than ever. The same principles that apply to splitting apply here as well. In effect the chisel is entering the wood directly on either the radial or tangential plane.
Chop the mortise to a depth of about 1-1/2″. It’s easiest to get that depth at the middle of the mortise; at the ends it requires a little more attention. There is a tendency to pry against the end grain of the mortise – this will bruise and deform the wood there. Stay away from the final ends of the mortise at first, that way you can pry against the end grain that will end up as waste. Finish up by taking cuts straight down the end grain with the back of the chisel perpendicular to the stile.
Fig. 4.14 (top) Here, the mortise’s bottom is ragged, but it doesn’t need to be much cleaner than this. The tenon will never reach that far. Fig. 4.15 (bottom) This photo and the previous one were shot between a piece of oak and a pane of plate glass. This allows a cross-section view of a chisel cutting a mortise. This experiment was quite helpful in understanding what goes on during the mortising process. Thanks to Roy Underhill for teaching us this technique.
To get the last bits out at the bottom of the mortise’s ends, chop straight down into the ends, then turn the chisel around, and with the bevel down, drive the chisel into the midst of the mortise, and come toward the ends. Now bring up the chip on the back of the chisel.
Whitney at her Lost Art Press book release party, fall 2022.
Whitney Miller, author of “Henry Boyd’s Freedom Bed,” continued looking for a news reporter position while working at Walgreens from October to December 2014, and in December she was hired as Morning Show Associate Producer/Digital Content at Fox Television KRIV in Houston.
“I was a behind-the-scenes journalist so I would write stories,” she says. “And they would let me create videos on their Facebook page. I remember writing a reporter story for Facebook and they liked it so much they let another anchor read the story and aired it on television. I was like, ‘Well, if what I wrote and put together was good enough for somebody else to read, then I should be able to read it.’ I was only there for a year and then I got back on air in another market, which was the normal trajectory of how it should have been. But it was good because I got to see what a big market was like.”
In November 2015, Whitney was hired by KBTX, the CBS affiliate in Bryan/College Station, Texas.
“I loved it,” Whitney says. “I was finally back in the saddle, back where I was supposed to be. I was there less than a year and started anchoring. Then I became the weekend anchor for three years after that. In College Station I became a professional woman, because in that community, they really love their news people. Especially if you’re from Texas, they really embrace you. And I also learned how much I really liked to tell stories. I got to meet so many people who believed in the work I was doing.”
A Maker
Throughout her life Whitney has been the type of person who, if she sees something she likes, she tries to make it before she buys it.
“I think that was grown out of lack, not having enough money to get all the things,” she says. “When I was younger it was friendship bracelets and tie-dyed shirts – just things that everybody made, I tried to make.”
The internet broadened Whitney’s horizons. Online she was introduced to new ways of doing things and while living in College Station, she found a lot of ideas on Pinterest.
The farm table Whitney built with the help of the family owned business, Country Thang Design (pictured above).
“I wanted to decorate my apartment but I needed to do it on a budget,” she says. “So I would look up stuff and I’d be like, ‘Oh! I want to make this farmhouse table!’ I met a family owned business, Country Thang Design, who made farmhouse tables and they showed me how to make one. I remember feeling like, ‘I can do this.’”
The gold headboard Whitney made.
Whitney made her own headboard, and some headboards for friends. She learned how to sew and DIY T-shirts. And then, in 2017, her best friend bought her a Cricut Maker machine.
Whitney putting her Cricut Maker to use.
Whitney’s decorated door in Cincinnati.
“I have been really crafty since then,” she says. “Every time I get access to a new kind of tool or knowledge, it just unlocks more creativity.”
Whitney sewed this skirt.
Whitney doesn’t call herself a seamstress though. And for the longest time, she has refused to call herself an artist.
“It’s how I feel about journalism, I know a little bit about a lot,” she says. “Is a jack of all trades somebody who knows a little bit about everything? I’m like a jack of all trades. I like everything. I have tried everything but I have not mastered everything. I think to call yourself a seamstress, to call yourself an artist, you have to know everything about it. I think there’s some doubt there, I’m sure.”
But it’s not a negative feeling, she says. Rather, she has longer preferred to call herself a maker versus someone who is creative.
The rose Whitney would draw over and over again when she was younger.
“I feel like I’m changing that now, now that this book has been created. I would say I’m creative at this point. I had the ability to draw in the past. When I was a kid, I took classes but it was never like, ‘Oh, you’re such a talented artist.’ Back then once I learned a technique of some kind, like these roses, that’s all I would draw. It wasn’t like I was coming up with anything new.”
Now, with the release of “Henry Boyd’s Freedom Bed,” Whitney agrees she’s an author and an illustrator.
“Which is weird, yes, but now I am,” she says. “Now I agree. But in the process of making it, I was like, ‘Uh, but are we? But am I?’ Because the early drawings were trash. It was like, ‘What are those?’”
From The Queen City to The Big Easy
In November 2019, Whitney left College Station, Texas.
“Growth has to happen,” she says. “I got to the point where I mastered College Station. There wasn’t an opportunity to be promoted to the main anchor role. I just knew I either needed to get to a bigger market and continue reporting, or I needed to anchor somewhere. I started looking for jobs once my contract ended. Cincinnati was my next stop.”
Whitney at WCPO
At the time, Whitney, who was hired as a reporter at WCPO, says Cincinnati felt like a wonderful situation. What she did not foresee – nor did anyone foresee – was a pandemic.
“I just packed up my life and moved,” she says. “ I just knew I was about to live my ‘Sex and the City’ life,” she adds, laughing. “I envisioned myself walking down the street next to the stadium holding my cute little dog, Derwin, and some football player, doctor or lawyer was going to stop me and say, ‘Oh my God lets get married.’ None of that happened! None of that happened. And that was very disappointing. Instead, there was this whole pandemic and I sat in the house with Derwin instead!” she laughs.
Whitney at her new job as weekend news anchor at WWL-TV Channel 4 in New Orleans.
Whitney was a reporter for three years until she announced her departure and new job as a weekend news anchor at WWL-TV Channel 4 in New Orleans.
“I didn’t pick New Orleans, I think New Orleans chose me,” she says.
For more than 10 years Whitney has been a reporter and at this point in her career, she’s ready to grow as an anchor. She entertained several markets but once New Orleans became an option, nothing else made sense, she says.
“Part of that is the acceptance I feel in New Orleans. The people, the vibe, the culture is just so open. Especially coming from a place where I feel like it’s very closed, people in Cincinnati are tight and I feel like it takes years to be fully accepted there. I’ve made a lot of friends and met a lot of wonderful people in Ohio but that hospitality piece is just unmatched in the South. Nobody can beat that, especially New Orleans. It’s such a place of gathering and festiveness.”
Whitney will be living in the city, about a mile or two away from the French Quarter. Although she grew up in the suburbs and loves a good Target-Michaels-Jo-Anne’s situation, she enjoys the diversity and eclectic atmosphere city-life brings.
“I’m so excited,” she says about the move. “I can’t wait. It’s literally, it’s a dream. It’s a dream.”
The Magic Mountain
Christopher Schwarz has long been interested in Henry Boyd. Suzanne Ellison, Lost Art Press’s intrepid researcher, began researching Boyd years ago, and discovered a rich and impressive story about an enslaved Black man who bought his freedom, invented a revolutionary bedstead, built a woodworking business that shipped beds all over the country and helped enslaved people escape to freedom.
Whitney took a class at Lost Art Press taught by Megan Fitzpatrick. She built a Dutch tool chest.
Meanwhile, Christopher wife, Lucy May, worked with Whitney Miller as a digital reporter at WCPO. (Lucy is now host of Cincinnati Edition on 91.7, WVXU.) Lucy introduced Whitney to Christopher, and Whitney took a class at Lost Art Press. It soon became clear that Whitney, with her backstory, passion for making and writing chops, was the perfect fit for writing a children’s book about Boyd’s life. Christopher asked and Whitney immediately agreed.
“For the longest time nothing would happen,” Whitney says. “It would just be one sentence on the page, no matter where I sat. If I went to a bookstore, if I went to a library, I couldn’t get out more than one sentence. I would read and read the research and I would try to come up with something and I would just think, ‘How are kids going to relate to this? How can I speak to kids so they will listen?’ And then I went to that mountain, the magic mountain. And the words just came out.”
Whitney has a friend who owns a retreat area in Whitwell, Tennessee, near Chattanooga called Bolt Farm Treehouse. Last summer they decided to meet and catch up. They originally planned to meet somewhere in the middle but after not being able to find a place, Whitney decided to drive and meet her friend in Tennessee. Along the way she saw fields and cabins – landscapes that looked like, in her mind, what the landscape might have looked like in Henry Boyd’s time. And that’s when the trip started to feel like it was meant to be.
“For me, the book writing process was very reaffirming because of how and where and which it all came out. Because it all came out at time in such a calm peaceful place just meant to me that it was meant to be. The reason I was on the mountain was not planned. The timing in which all the things occurred was not planned. Writing the book was not planned. None of it was planned. But when it happened it happened and it was so good.”
Something similar happened while illustrating the book. At first Whitney says she was frustrated and worried that she bit off more than she could chew. But then she put her journalist hat on and her maker hat on and researched – she figured out what she had to do. And then she found herself unexpectedly back at the magic mountain.
“It was another unplanned trip back,” she says. “And up there my creative juices started flowing so I was able to knock out a lot of pages and the timing was perfect.”
In August, Whitney began to feel the pressure of time. She had a big journalism convention coming up, weddings to attend, and her drawings weren’t done. The day she was flying out to her convention in Las Vegas, she had three more pages to draw. The flight was delayed. So, she began working on the pages. As she drew, the flight continued to be delayed. There was talk of cancellation. Whitney kept drawing. And just as she finished her last page, it was time to board the flight.
Don’t Be Afraid to Try New Things
Whitney recently read “Henry Boyd’s Freedom Bed” to kids at the Saturday Hoops program, held weekly at Lincoln Recreation Center in Cincinnati. Teenagers and parents were listening to it, equally engaged. As were little kids. And then a little girl said Henry looked like her dad. It’s happened several times now.
“I mean, I can’t even,” Whitney says. “That alone was enough for me, because you just don’t realize – when I think back to my own childhood, the books that stood out to me are the books that had people who look like me in them.”
Whitney recalls Addy Walker, a fictional character from the American Girl series, and books about Black inventors that her mom would give to her and her sister.
“I don’t think I ever understood why, but when that little girl said, ‘Oh look, it’s Daddy!’ I thought, ‘Oh, this is why this is so necessary.’”
Whitney doesn’t like to do five or 10-year predictions because life has already taught her that you can’t predict what is going to happen.
“I couldn’t tell you this book was going to happen,” she says, “I’m always just amazed at the plan God has for my life because I think he just laughs at mine. I just know that I will be successful. I see success in my future, period. There’s no way I can fail. Because even when I fail, it’s not failure. I don’t see stopping. Stopping doesn’t happen over here.”
Whitney has always been positive by nature, something she attributes to both her mom and dad. She says those who constantly try to bring positive people back down to earth live from a place of fear.
“Being a realist and not having any hope can be detrimental,” she says. “If you don’t see freedom. You are a slave to your own mind. And I’m not that. And I will never be that. I know there’s no limit. It’s like infinity and beyond for me.”
That said, she differentiates being a realist from keeping it real. When speaking with younger generations, she sees that for some, it’s more difficult for them to cope with truths. So Whitney says she doesn’t sugarcoat. But she also doesn’t speak in absolutes.
“Dreams”
“We live in such a time that anything can happen,” she says. “You can go viral tomorrow for some silly TikTok you did, and then somebody discovers, Oh, wait, there’s some substance to you because they were on your page just looking at the silly little thing you did. We live in such a world where opportunities come at the blink of an eye.”
Whitney also credits the divine.
“There’s no way that I sat next to Lucy, we talked about wood, she introduced me to her husband who is a woodworker, who writes freaking books, you know what I’m saying?” she says. “I take a class and then all of a sudden he says I should write a book. Oh, you think you can draw a book? There is no realism in that – there is no reality in that. That is some hocus pocus shit. That is, literally, Jesus. There is no other way. I was not thinking about trying to write a book. I didn’t plan this. And I don’t take it for granted that there are people who have stories they want to tell and who are really trying to figure out how to do it.”
Fear, doubt and limiting thoughts, Whitney says, are so often what gets folks stuck.
“I just want people to not be afraid to try new things,” she says. “I think that’s what Henry Boyd did, out of necessity, and I think that’s what I did with my life, too. I figured out a job because I needed the money. I knew I wanted to be a journalist by any means necessary and I figured it out. You can’t be afraid to figure it out. That’s my lesson: Don’t be afraid to figure it out.”
We’re closing out our reprint of the “Stanley Tools Catalogue No. 34,” and are selling remaining copies for $10 each, simply to free up space on the warehouse shelves. Every purchase comes with a free PDF copy – once the 450 (or so) print copies are sold out, we’ll continue to offer a free PDF of the 1914 catalogue here on the blog.
This catalog shows nearly every tool needed in a hand-tool shop 100 years ago, from the chisels to the butt gauges to every sort of plane in the company’s line. The text explains what each one is used for and how it functions differently from other similar tools.
The catalog also has fantastic exploded views of many of the complex tools, such as Stanley’s miter boxes, the multi-planes and handplanes. It’s a great resource to have on hand at a tool meet or antique market – not only to identify vintage tools, but to see if all the parts are intact.
If you are just getting into hand tools, we think you will find this catalog a delight to read, hold and learn from. The information in it is factual and straightforward – not the puffery you get from many modern catalogs. And if you collect or appreciate vintage hand tools, we think you will love this catalog, which reproduces the vintage drawings with remarkable clarity.
Once these are gone, we are not reprinting. So get it now or forever hold your (Harvey) peace.
