Katy has just finished up a batch of 30 tins of soft wax and listed them in her etsy store. It’s been a crazy summer for her. She’s been working (a lot) as a bagger at the local grocery, and she had (a lot of) summer homework to complete before starting school.
Each 4 oz. tin is $12 plus a modest shipping charge. All the wax is handmade by her in our workshop here in Kentucky. No slave labor (other than her father) was involved.
— Christopher Schwarz
“(W)ork badly made is always too expensive.”
— A.-J. Roubo, “l’Art du menuisier”
I’m finishing up the editing on “To Make as Perfectly as Possible: Roubo on Furniture.” On Wednesday it goes back tot he translation team to review our edits. Then to the printer. We are shooting for a November 2016 release of the standard edition. (Details on a deluxe edition to come.)
It is not an early morning forum update like it usually is, but it is written from the most scenic viewpoint so far. Instead of my office I am sitting in beautiful Turkey Run State Park in Indiana. After an exhausting morning of hiking it feels great to sit back, relax and write the update. (Especially when it is quiet because your husband has the toddler.) A lot is going on in the forum these days, this update is just the tip of the iceberg. So don’t rely on me; make sure to check it for yourself throughout the week. Remember, if you have a question about our products, procedures in our books or anything related to Lost Art Press, the fastest way to get an answer is our forum. Check it out here.
Worktable and Bookcase
Adam is looking to put a version of the bookshelf from “The Anarchist’s Design Book” on top of the worktable from the book. He has a sketch drawn up but thinks it looks a bit top heavy. See the rendering here and give your thoughts.
Steaming Boards Flat
Anybody have experience trying to steam boards flat? Another Adam has finally found the Brazilian mahogany boards that he has been looking for but they are a bit wavy. If you have any tips to give him, here is the link.
Strong Trunk: How to Accommodate Wood Movement with Brass Straps
Inspired by “Campaign Furniture,” William is about to start on a trunk. However, he is concerned about the brass straps constraining the wood and leading to splitting. If you have advice or would like to see the responses so far, the post is here.
Workbench Holes worn out from Holdfasts
Shannon has a “Naked Woodworker”-style Nicholson bench that is less than a year old. She has noticed that a couple of the holes on the bench have become ovals and are no longer holding the holdfasts as tight as they used to. She has a few ideas on how this issue could be resolved but is looking for some insight from those who might have had the same issue. See if you can help here.
ADB Bookcase – An Eagle Scout Project
Hats off to Brett and his son for taking on the bookshelf from “The Anarchist’s Design Book” as an Eagle Scout project. Brett’s wife works at a Title 1 school that was in need of six bookshelves and their son rose to the occasion. Pictures are above and the link is here. Awesome work you guys!
— MB
You can register to attend the Crucible Tool event at 7 p.m. Sept. 15 using this link. Please note that we can accommodate only 100 attendees because of fire codes. So don’t dally.
— Christopher Schwarz
One of the interesting aspects of building this second Roman workbench has been how useless machines are to the process.
The benchtop is too big for a jointer and planer – and too heavy to move without a crane. But a jack plane trued it up quickly without any back strain.
When it came to the tapered legs, my plan was to cut away some of the excess on the table saw. I have a 3 horsepower cabinet saw, which usually can handle anything in furniture making. But the oak legs were too dense and wet. The saw bogged down and the thermal overload switch popped several times.
So I turned to the band saw with a fresh blade. Ditto. Once again, the jack plane and jointer plane did the majority of the work, and in fairly short order. (After wasting away a lot of material I did use my electric jointer to tidy things up with some light passes.)
Turning the tenons was like riding a bronco at a prison rodeo. I have a midi-lathe that I clamp to my massive French oak workbench. Even though I carefully balanced each leg between centers, the entire bench jumped and wobbled as I turned the 3”-diameter 5-1/2”-long tenons at 500 rpm – the slowest speed available.
Now comes the mortises. I hope that my corded drill is up to the task.
— Christopher Schwarz
