Business Insider recently released a video on India’s shellac industry with amazing footage of how it’s made. You can watch it here.
While we think of shellac as a finish, it’s also used to coat candy and pills, preserve fruit, make bangles and more. Learn how the Kerria lacca insect secretes lac and see how it’s harvested using methods that originated 3,000 years ago. Follow along as the video highlights careful steps in production and watch as workers use their hands, feet and teeth to stretch large sheets of shellac. This video packs a lot in 10 minutes and is fascinating to watch.
Hickory bark seats on post-and-rung pieces in Jennie Alexander’s shop. Photo by Narayan Nayar
The following is excerpted from the third edition of “Make a Chair from a Tree,” by Jennie Alexander (though for this chapter in particular we are indebted to Peter Follansbee – he’s shown doing the work here!).
This third edition of Alexander’s “MACFAT” is the culmination of a lifetime’s work on post-and-rung chairs, covering in detail every step of the green-wood chairmaking process – from splitting and riving parts to making graceful cuts with a drawknife and spokeshave, to brace-and-bit boring for the solid joinery, to hickory-bark seat weaving.
With the help of Larry Barrett, one of her devoted students, she worked on this new version of the book until just weeks before her 2018 death. Larry polished Jennie’s final manuscript, then built a chair in Jennie’s shop using her techniques and tools as we took many of the photographs for this book. Nathaniel Krause (another of Jennie’s devoted students), wove the hickory seat for this book. Longtime friend and collaborator Peter Follansbee helped to edit the text into the intensely technical (but easy to understand) and personal (but not maudlin) words that ended up in this third edition.
Post-and-rung chairs usually have fiber seats. Ash or oak splints are sometimes used. I also remember a beautiful American elm inner bark that Dave Sawyer used. Woven hemp tape is a beautiful natural tan and is long-lasting. Canvas tape, sometimes referred to as Shaker tape, comes in various widths and colors. Rush seats are favored in many cultures. The inner bark of hickory trees makes a very beautiful seat and is my personal favorite. I find it the best seating of all. It is strong, long lasting and attractive. Harvesting it yourself is a challenge.
Harvesting Hickory Bark Harvesting your own hickory bark is the ultimate experience in seating this chair. First, this is seasonal work. The cambium layer is slick in the spring and early summer and that’s bark season. Then you must find a suitable hickory tree. A tree too large is difficult to manage. I look for something 1′ or less in diameter. Like the logs for our chair, it needs to be straight and clear, and in this case, the longer the better.
Here one end of the sapling is propped on a trestle, the other on a riving brake.
Here some of the bark strips on the right have already been removed. But you can see the pattern on the inner bark that’s used as a guide for the thickness.
After you fell the tree, you can work on the log in place in the woods. If you can manage it, it’s best to take the log back to your shop. When you are done, the wood awaits you for chairmaking. Harvesting bark is slow, careful work. I like to position the log at a comfortable height. Sometimes I cobble up a few X-supports to raise the horizontal log to low chest height. You get a better view.
Drawknife the corky outer bark until you see the criss-cross fiber pattern of inner bark. Experiment with a short section to decide how much outer bark to remove. It is difficult to drawknife down to the correct thickness without cutting through the inner bark. In many trees, drawknifing until there is an equal width of the interlocking light and dark strands of bark fiber will result in a good, even thickness. I aim for a thickness of about 1/16.”
Once the outer bark has been removed, you are ready to cut the strips of inner bark. Strips about 3/4″ wide will make a good seat; they usually shrink in width a little so not narrower than that. Use a knife to slit the bark into strips along the trunk. Catch the point of the knife in the long fibers of the sapwood and, within reason, let them guide the knife.
Picking up in mid-stream again, with some strips already peeled. Score the width with the point of a knife. Make sure you cut all the way through the bark’s thickness.
I made a knife with a long handle. I rest the handle on my shoulder. I clamp down on the middle of the knife handle and make two cuts down to the cambium layer where all is slippery. It doesn’t matter if you cut down into sapwood. Lift one end of this first exploratory strip; it’s no more difficult than peeling a banana. How thick is it? If it’s too thick, lay it back down and thin it down some more. The bottom of the strip will need no attention, it will be smooth. It is amazing how it slides off the tree.
Poke your knife just under the end of the strip, then lift it up. Is it too thick? Or just right?
When you are stripping, work carefully around the knot holes and other defects. If possible, do not terminate the strip to remove the defect. Instead, widen the strip to enclose the defect and then return to the proper width. We want all strips, defects and all, as long as possible. When you weave the strips into the seat, you may be able to work the defects under the seat and save long inner bark strips. If not possible, then cut the defect out.
Carefully work along the sapling, lifting the strip as you go. Keep your knife handy in case you have to snip here and there to free the strip.
You are using the tree as your work surface. So, lift the strip slowly off the tree. As you do so, use your knife to clean up defects and variations in thickness and width.
Coils of hickory bark. Keep them dry until you need them.
This is the best time of all to finish the bark for seat readiness. Barking is the most tedious part of chairmaking and the most rewarding. But good bark is like leather and it’s well worth the effort. Wrap and tie the bark strips into coils for storage. Keep them in a dry place to avoid mold.
It’s a bit difficult to put a label on this book. It’s not really a catalog of the pieces produced by Nakashima Woodworkers, but it is filled with drawings and images of the pieces the company makes. It’s also a short history of the workshop, a close explanation of how they work and a sometimes-lighthearted look back at George Nakashima’s life and work.
Called the “Process Book” and written by Mira Nakashima, this 2023 book is unlike any other book I have encountered in my career as a publisher and a woodworker.
The book is a deconstruction, showing you its structure like a wedged through-tenon or visible dovetails. When you first unwrap the book, it looks like it has a dust jacket. But when you open the jacket, you find that the jacket comes off and unfolds into a large poster. One one side is a photo of George Nakashima and on the other are construction drawings.
The book block has no boards or paper cover. Instead it is like looking at a component from a pressroom. The spine of the book shows the thread running through the signatures. And the glue that reinforces the signatures. You can see clearly the registration marks from the press (usually obscured) that guide the bindery as they assemble the book block.
And while there is no formal “cover,” the pages of the book are protected by heavy printed end sheets.
Once you start exploring the interior of the book, there are more surprises, including large fold-out sections and gorgeous photography displayed on premium uncoated paper.
The whole experience is much like experiencing a piece of well-made furniture. First you see the form – it’s a book. But as you get closer and interact with the piece you come to understand it was made with incredible care and it gives up its secrets slowly but inevitably.
If you love the work of George Nakashima and his daughter, Mira, this book is essential reading. The book is filled with sketches of the pieces the shop sells, plus many archival images and drawings that aren’t shown in George Nakashima’s “Soul of a Tree.”
The book details the process of building a piece of furniture for both the customer and the workers. It explains with great clarity how wood is chosen for each piece of furniture in a way that helps determine the final design of the piece.
And as you work your way through the book, folding and unfolding and marveling at this detail or that curious drawing, you become an active participant in the creation of the book. After you are done with the text, you put it all back together again. And there it is, the form you started with.
The book ships with a current price list (always interesting). “Process Book” is a delightful piece of work. And at only $35, it’s a steal for printing and binding of this caliber.
Fig. 2. China cabinet door, late eighteenth century.
As a general classification some six general types of doors have been evolved over the years, though the variations on each are almost unlimited. Only a few can be illustrated here, but the reader should find the range useful when he comes to design or make up a piece of furniture.
The purpose of a door is clear and obvious enough, yet the variety of ways in which it has been made over the years is amazing. Consider, for instance, how far removed the delicate-traceried door in Fig. 2 is from the single slab oak door in Fig. 1, virile and spirited though the latter is. Of course, the two belong not only to different ages, but also to different techniques of construction. Obviously, too, the usage the two would have to face would be entirely different, the Gothic specimen standing up to everyday use, whereas the eighteenth-century door belongs to a cabinet intended for a drawing room, used only by genteel people.
Framed and panelled door. Second half seventeenth century. Shows several interesting features. The stiles are beaded with the scratch stock, but the beads run out at the rails so that the tenons have square shoulders. On the centre muntin no attempt is made at mitreing—indeed, there is no corresponding moulding on either rail. The difficulty is overcome by butting at the top and scribing.
At the outset it is interesting to consider the reasons for changes in construction, apart from the variations in form largely dictated by fashion. A single slab of wood is the simplest form but carries with it certain disadvantages, perhaps the chief of which is its liability to shrink. It might also cast, though both of these potential faults would be minimised by the use of quarter-cut timber. Possibly a more serious drawback is the limitation imposed by the widths in which timber is available. A wide door would have necessitated jointing and possibly using cross-battens at the back. A last undesirable feature is the single grain direction. Oak is a tough wood, but it does cleave easily, and such a door could easily break.
Framed door with turned spindles. First half seventeenth century. Frame is joined with mortice and tenon joints, the spindles having dowels turned at the ends. Turning appears to have been introduced in the mid sixteenth century and was quite commonplace in the following century. Most early turning was done on the pole lathe, the springy pole reversing the rotation after the power stroke.
It was no doubt a combination of these drawbacks that brought about the framed system of construction. The frame itself provided strength across width as well as height, the panel being more or less a filling. Being free to move in its grooves, there was no liability to split in the event of shrinkage, and the over-all width of the door could be increased—in fact it only needed centre muntins for the width to be increased ad lib.
Single slab oak door. First half sixteenth century. Pierced right through with Gothic tracery designs and with simple channelled moulding cut with the gouge. From a food cupboard. It is in a single piece of oak, and has suffered from woodworm, but is otherwise sound and has remained quite flat. It is the simplest form of door, but has certain constructional disadvantages (see photo [at top]).
The introduction of veneering made it desirable to have flush surfaces, and so the clamped and flush panelled door was used, not always with success owing to its liability to split due to resistance to shrinkage. Finally today we have veneered flush doors of multi-ply, lamin-board, or chipboard, in which many faults have been eliminated (though even here there are certain snags).
Framed and panelled oak door. Early seventeenth century. The craftsman has used the true mitre, and has overcome the problem of combining this with the grooving to contain the panels. Note how the mortice is set in at the inside since the tenon is automatically cut away by the grooving. At the same time the tenon has long-and-short shoulders because the front of the stile has to be cut back level with the moulding which is worked in the solid. The whole thing is assembled without glue, the joints being pegged. Mostly the oak was quarter-cut, sometimes being riven.
Framed door with raised panel. Second half seventeenth century. The main outer frame is grooved to hold the panels, but the moulding is separate and is mitred round. At the centre the main members are mitred and rebated to take the small raised panel, a bolection moulding being fitted to hold it. Sometimes quite elaborate patterns with mitred mouldings were made. One common pattern had diamond-shaped panels, in which case, of course, the mitre lines halved the over-all joining angle. Bolection mouldings giving a raised-panel effect were often used.
Flemish cabinet door. Seventeenth century. The moulding of the main framework is worked in the solid and is mitred at the corners. A characteristic feature is the wide use of channelling and flat recessed beads. Carving is in the solid, the background being cut back leaving the detail in shallow relief.
Long clockcase flush door. Late seventeenth century. Interesting in that it is an early example of veneering. The ends are clamped as shown and a strange feature is that the clamps are sometimes merely butted without any tongue. It seems a risky construction, but of course the veneer strengthens it considerably.
Clamped and veneered flush door. Second half of seventeenth century onwards. Most usual construction was of pine with clamped ends tongued on. The weakness was the liability of the main panel to shrink, and this showed itself eventually either in stress marks in the veneer towards the edges as shown here, or in cracks towards the centre. An alternative sometimes followed was to fit a flush panel in a framework, but there was still the potential danger of cracks or stress marks due to shrinkage.
Framed and veneered door. Early eighteenth century. Framework is veneered with walnut, and has an applied bolection moulding at the inner edge forming a rebate for the panel. Construction is rather unusual in that the top rail runs right through, and has resulted in slight stress marks, the consequence of shrinkage. The veneer is mitred at the corners, but was frequently butted, the joint lines vertical.
Barred door in mahogany. Mid-eighteenth century. The lattice moulding was usually of astragal section about 3/8 in. wide, the back grooved to fit over 1/8 in. bars. The glass was either beaded or puttied in. Note that the section of framework moulding is half that of the lattice. In all cases the mitre lines halve the over-all angle of the joining mouldings. Below are framework and moulding sections.
Framed door with fielded panel. Mid-eighteenth century. A costly door to make, especially by hand methods. A square-edged frame would be made first, and the inner shape bow sawn. The rebate would be largely chiselled. The scratch stock would be used for the moulding, though the carver would finish off the sharp inner corners. The fielding of the panel would again need the scratch stock.
Panelled and veneered door. Second half eighteenth century. Made in either of the two ways shown. The frame is assembled and the elliptical shape cut out. After veneering across the grain the small thumb mould is bent round and fixed, thus forming a rebate. The panel is veneered, dropped in from the back, and held with a bead.
Framed and panelled door. About 1770. The top curve is formed by making the top rail extra wide and packing the stiles locally, cutting to shape afterwards and veneering. The moulding would be either made up separately and applied, or worked in the solid. In the latter case the whole thing would have to be in mahogany, or a local edging of mahogany would be applied. Lower quadrant corners are set in separately.
Built-out door in mahogany. Second half eighteenth century. Here again the top is a wide rail cut to shape after assembling. The rebate is worked around the curve (that on the straight parts being done before gluing up). The panel is dropped in flush and the joint covered by a half-round sausage and berry mould. Tongues are used to hold the canted corners.
French type door, part gilt. Late eighteenth century. Rails are made wide enough to include the curves, and are put together with long-and-short shouldered joints, the stiles being rebated beforehand. After cutting the rails to shape the rebates are continued round the curves. The panels are dropped in and held by the face moulding which is mitred round. To form the carved details blocks are glued on and carved when in position, though in some cases the whole thing is carved in the solid, the groundwork being recessed.
Barred door in mahogany. Late eighteenth century. After assembling the framework, the bar mouldings are grooved and worked with the scratch stock at the shaped edge of a board, cut out, and assembled over a marked-out panel fitted to the door rebate. All mitre lines halve the over-all angle. Glazing bars are added at the back afterwards, being checked into the frame. Thin strong canvas glued to the joints in the bars strengthens them.
Framed door with raised panel. Early twentieth century. The framework is morticed and tenoned together, the inner edges being grooved to receive the tongues of the panel. The latter is grooved to enable the panel to project, and a wide rebate on the face gives a double stepped effect. The tenon is haunched, the end of the groove being thus filled in.
Raised and veneered door. About 1930. Here again the panel is raised and is tongued into the framework which is mitred and tongued. A wide, shallow chamfer is worked around the framework before assembly, and a corresponding local chamfer formed at each corner (see dotted lines). The panel corners are canted to line up with the chamfers.
Veneered flush door. Late eighteenth century onwards. Narrow straight-grained strips are glued side by side with heart sides alternately outwards and inwards. In best work this is counter-veneered across the grain both sides, and the face veneers put down lastly. In many ways this is the most reliable construction. Counter-veneers are frequently omitted, even in good class work.
Gothic oak door. Modern construction. The main framework is grooved to hold the panel, and the mould at the edge is stuck in the solid, the corners being finished with the mason’s mitre. To obviate extensive recessing, the tracery is applied, the whole fitting into the grooves in the framework. To avoid shrinkage complications the grain of the tracery is vertical and thus any movement in this is the same as that of the panel. Note that the groove in the framework is wide enough to take both panel and applied tracery.
Veneered flush door. Modern style. Both sides of the door should be veneered, and in the best work both sides are counter-veneered. Note that in any case the grain of the veneer which touches the groundwork is at right angles with the outer layer of the ply or laminboard. Unless this is done hair cracks may develop. Usually such a door has to be lipped. If this is done first it is concealed by the veneer. When done after veneering it shows but protects the edges of the veneer.
Framed and faced door. Modern. Usually the framework is dowelled and panels of plywood or hard board glued on, preferably on both sides. When the door is large it is advisable to bore holes through the framework so that the air contained in the spaces remains at equilibrium with the outside atmosphere. Such doors are usually used for kitchen fitments, etc., and are intended to be painted. The intermediate rails are desirable because otherwise the panels are liable to sink locally.
Folding-sliding doors. Modern. Invariably the flush-type door is used, the three members being hinged together as shown. Pivots are fixed top and bottom at the edge of the centre door, these sliding in grooves in the top and bottom. As it is difficult to fit the pivots at the extreme edge of the door, the width of the latter needs to be calculated carefully so that when opened fully it lies back flat with the door hinged to the cabinet side. The doors nowadays are usually veneered plywood or blockboard, in which case they are lipped.
Frameless sliding glass door. Modern. Although the glass can slide in grooves worked in the wood, it is more usual nowadays to use the special metal or plastic channelling made for the purpose—at any rate at the bottom. It is essential that the top grooves are double the depth of those below so that the doors can be lifted out.
Framed sliding door. Mostly twentieth century. Here modern practice is to use gliders beneath the door, these running on special fibre track. Bottom edge of door is grooved, but track does not engage with this. It is made to take the gliders and at the same time give clearance over the track. Top of door may slide in wide groove.
Bow-front door. Eighteenth century and onwards. Framework is rebated and moulded to receive the panel, an essential feature being that the stile rebates are parallel so that the panel can be inserted after assembly. Owing to the short grain of the rails, it is more satisfactory to use dowels than tenons as the last named would have little strength. An alternative is to fit loose tenons.
Serpentine doors. Eighteenth century and onwards. Here again the rebates have to be set out so that they are parallel, but usually there is no difficulty because the curves often cancel each other out. When curvature is only slight the panels are usually bent. Today all rebates and mouldings would be worked on the spindle moulder or with the electric router. For hand work the rebates would be part planed and part gouged and chiselled. For the mouldings the scratch stock would be used.
Bow flush door. Eighteenth century and onwards. Traditional construction was to cooper the doors and veneer both sides, preferably counter-veneering as shown. Present-day tendency is to laminate, gluing the layers between pairs of formers. The face veneer could be made up separately and put down with a curved caul, though care would have to be taken to ensure that the mitre lines coincide with the corners. Otherwise the centre panel could be laid, and the elliptical shape cut round the edge of a templet. Afterwards, the border is fitted up to it. To avoid a bad joint it is common to fit an inlay line round the edge of the ellipse.
French bombe door. Mostly eighteenth century. Expensive doors owing to the compound curvature. Setting out in both plan and elevation essential. By jointing pieces together and adapting their width according to their position, it is only necessary to level the joints to reveal the line at the fulness. At top and bottom a templet is used to show the shape. Some such procedure is essential as the doors are always made in pairs, and the two must obviously be alike. At the meeting edge another templet is used to mark the shape, but the blending of the curves becomes a matter of judgment. The work on each should be done in stages, and the two placed together in position for the final shaping. Parallel lines drawn horizontally enable further testing templets to be used in various positions, but the hand drawn lightly over the surface reveals any waviness. Veneering both sides follows, and invariably a built-up pattern is used to enable the veneer to be tailored to the curve. Reliable straight-grained wood is essential for the groundwork.
Tambour doors. Eighteenth century onwards. Consists of a series of narrow strips glued to canvas backing. Ends fit in grooves worked in top and bottom. As most tambours bend in one direction only it is necessary to cut a feeding channel at the back as shown by the dotted line, this being afterwards filled in. Strips may be of the same wood or in contrasting woods. In the former case they are often cut from a single board and assembled in same order, When a flat section is used (V), the joints are almost invisible. Narrow-bead sections may be worked in pairs (W), but wider ones need to be worked singly (X). When bending in both directions is necessary a similar section to either (Y) or (Z) is necessary, though only slight reverse bending is possible. This curvature is sometimes needed on serpentine shapes. It is necessary to assemble the strips on a jig as it is essential that they are put together square, otherwise curious complications can arise. For a bow-front cabinet the assembling jig would have to be correspondingly curved.
Chief types of doors. We show here in simplified form the main types, with all decorations and complications omitted. All doors are based on one of these, or combinations of them. 1. Slab or solid type. Has the advantage of simplicity but has some drawbacks such as liability to cast and to shrink leaving gap at closing edge. 2. Framed and panelled. Panel may be grooved or rebated in. Latter preferable for work to be french polished. Edge may be moulded or moulding may be applied. 3. Clamped. Suitable for flush, narrow doors only, and wood must be well seasoned. A combination of this and No. 2 is the framed and flush panelled type, the panel being tongued in and finishing level at the front. 4. Flush. Of laminboard or multi-ply. For polished work it is veneered both sides. Lipping may be added and an extra wide lipping fixed one side to take hinge screws. 5. Framed and faced. Used mainly for painted work. 6. Tambour. Useful alternatives for a wide, shallow space; also when hingeing would be impracticable.
Chris is already hard at work (shocking, I know) on a second LOTR-inspired chair, and I’m belaboring every word in my Dutch tool chest book manuscript. But we’re also here to answer your burning hand-tool woodworking questions. Or cat questions. Or late 19th- early 20th-century Russian literature questions (that’s Chris, not me; he contains multitudes). So post ’em in the comments below, and we’ll answer.