As promised, here are a couple updates to the products in our store. As of now, all of “The Anarchist’s Tool Chest” books shipped from Lost Art Press are the second printing. We have no more first editions left. If you are a mule for first editions, I recommend you check out some of our suppliers.
Also, we now have red “The Anarchist’s Tool Chest” T-shirts in our store. These are American-made shirts and are available in sizes small up to XXL. They are $20 each — get them now before we run out. Once these are gone, they are gone.
More news to come on the ePub edition of “The Anarchist’s Tool Chest.”
While examining Henry O. Studley’s toolbox, the most impressive moment was when all the tools had been removed and set aside. At that moment, I understood Studley as a joiner, not just a somewhat obsessive tool collector.
The box alone is a remarkable piece of work. Studley’s attention to detail extended to every surface that could be seen or touched. Don Williams – the author of the forthcoming book “Virtuoso” – and I spent a long morning measuring the major components of the chest. And as my hands passed over the woodwork, I felt I finally knew the man.
The visible screws were clocked; the others were not. Layout lines from his gauge and knife were clearly visible on many joints. His dovetails had a dramatic sweep – easily 14°. The inside components of the box were neatly dovetailed at key points.
But most of all, his design – his vision – was consistent. As I was calling out the details of the toolbox’s construction I began to understand Studley’s work patterns. Here are some preliminary insights I have cobbled together.
• The man loved coves. Many of his shopmade tools have tiny small coves at key transition points. All his gauges, for example, have small 1/16” x 1/16” coves on the ends of their beams. His mallet had this same cove in brass on the head. And on and on.
• He liked square ovolos. Many of the transitions on the chest are marked by square ovolos – a curve with two small fillets. This is the transition he would use between major elements of the toolbox.
• Small coves and fillets filled in the gaps. In many areas, Studley used ebony coves with small fillets to fill in the inside corners of his design.
• Surprisingly few ogees. The chest has a fair number of ogee shapes, but many of these are hidden to the casual eye. The cubbyholes for the planes had lots of ogees, but you can’t see these until every tool is removed.
• Gothic, gothic, gothic. Many of the curves and shapes have a gothic flavor. That’s pretty unusual in wood (it’s much more typical in stone). All his chamfers on his gothic arches are perfection. Absolute perfection.
• No plane tracks anywhere. I looked for them.
You can see a slideshow of the details of the toolbox without tools here on Flickr.
After poring over the toolbox with a tape measure and calipers, I am firmly convinced that Studley was not just notable for his collection of tools. He was a craftsman worth remembering, documenting and celebrating – which is exactly what we are doing with “Virtuoso: The Toolbox of Henry O. Studley.”
Henry O. Studley was a piano maker and he had a bench that suited his trade. And though we are still in the initial stages of researching his work, some accounts suggest that he was a craftsman who specialized in building prototype organs and pianos for the Poole Piano Co. before the units went into production.
This fact, if it bears out, helps explain some things we saw while poring over the man’s tool chest and workbench for Don Williams’s forthcoming book “Virtuoso: The Toolbox of Henry O. Studley.”
During our visit, I looked over the workbench that sits below Studley’s tool chest. It bears a family resemblance to the one owned by ironmonger Patrick Leach. Leach’s bench was owned by a piano case maker who lived in the same area and time that Studley worked. See the photos here.
So I am presenting the following bullet points on the Studley bench without much comment. I am still processing a lot of the data I wrote down, including 41 pages of typewritten notes, so I don’t have answers. I have just data and a sore bottom. But because data is better that a swift kick to… anywhere, here we go.
Some things I know about H.O. Studley’s workbench.
1. The benchtop is original. The base was made by the current owner and is modeled after the chest. The workmanship on the re-creation is excellent, though it is not aged to look like a vintage original.
2. The benchtop was acquired at the same time the owner acquired the chest.
3. The benchtop is made up primarily of three gorgeous pieces of Cuban mahogany. There are additional mahogany pieces on the ends that cover the end grain.
4. The top is banded by ebony that is let into a rabbet in the benchtop. The ebony is 1/2” x 1/2”.
5. Inside the ebony band, the three mahogany pieces measure 15-15/16” wide, 6-15/16” wide and 5-5/32” wide. The top tapers in its overall width. The tail vise end is 1/4” narrower than the face vise end.
6. The top is 3” thick overall, 30” wide (at its widest) and 78” long.
7. The dogs in the benchtop are 1” x 3/4”. The dogs are ebony. They are 4-1/4” long and are held in the holes with brass spring clips. The dogs are held flush to the top of the benchtop by a small metal clip at the bottom of the dog hole. This clip runs in a stopped groove in each dog. It is… remarkable. Every dog hole has a dog. All of the dogs are spaced on 7-1/2” centers, except for one.
8. The vises were plated with nickel when the owner acquired them, but they were rusting and in need. The collector had them re-plated. There was a lot of effort put into masking original surfaces to preserve the smooth action and tolerances of the vises.
9. The sliding dog on the tail vise is… interesting to me. It is a sliding dovetail that runs in ways that are cut in the vise chop. The tolerances on the machining is remarkable. The dog is pushed up and down easily and holds its position. All dogs should be so obedient.
Like all things with H.O. Studley, you should take this data with a pinch of salt. There is a lot of misinformation out there. The first Fine Woodworking poster of the chest discussed the “stonemason” tools inside it. Duh.
So I recommend you enjoy the photos and try not to jump to any conclusions until 2013, which is when Williams’s book on Studley is scheduled to be printed.
While seeing the completed toolbox of Henry O. Studley is a drool-inducing experience, the real excitement has been taking out each tool, photographing it from every angle and then measuring and documenting everything.
This is where the real questions and answers come from. Which tools did Studley make himself? Was he left-handed? What sort of joinery and moulding profiles did he favor? How did he treat his tools?
It might seem like a brutal slog, but we are having a ton of fun measuring every drill bit, peering into each ferrule and counting every rivet. We get only one chance to do this right the first time.
I have pages and pages of notes and small revelations. My head hurts. But we are going to keep measuring, micing and recording everything we can find.
Anytime I get to examine a piece of work this closely I feel like I know a bit about the builder by the end. This is no exception. This guy was one of the greats.
This morning we began shooting photos for the new book “Virtuoso: The Toolbox of Henry O. Studley,” and I shot this short video with a narrative by Don Williams, the author of the book.
There’s not anything more for me to add, except that these photos were taken by me with my Canon G12. The photographer, Narayan Nayar, is using his Leica M9 for the book’s photos.
