The good workman will never use poor tools when he can obtain good ones. The careless workman may, but such choice is an evidence of inferiority, and brands him at once as a man who takes little pride in his calling. A selfish consideration, if no other, will ordinarily impel the workman to select the best tools, because with them he can perform his labor with much greater ease, and with better effect, than with inferior ones.
Exact work can hardly be expected from the mechanic who uses inexact tools, although sometimes very excellent results are obtained where poor tools are employed. But this is always at the expense of greater labor and greater care. Rapidity of work often depends upon the character and condition of the tools employed. This is frequently illustrated in a vivid manner by the attempt to employ a dull saw or a dull plane. Even a trifling defect sometimes causes no end of trouble. To do the most effective work, tools must be of improved design, made strongly for use, and kept in good order. Then the conditions are ripe for executing work under the most favorable circumstances.
It is only the slipshod workman who will be content to use rusty tools, of antiquated design, and out of order, or verging on a state of dilapidation. As well might one expect to find a really superior musician drumming away on an old and worn-out instrument, whose every note gives forth a discord, as to see a bright, active and expert mechanic employing poor and badly-used tools. The good workman will insist on having good tools, and these he will see are kept in fit condition for work. Any other course would be prima facie evidence of his lack of superiority in his calling.
The Builder and Wood-Worker – December, 1885
—Jeff Burks
