There aren’t many things I miss about corporate America – except for Teresa.
Teresa runs the mailroom at F+W Media (among other things), and was always there to sign for packages and put them in your hands so you could race past the deadline (not a good metaphor) to victory! And riches! And a cocaine party with a puppy!
So today I was afraid to shower or even leave the front room of our house as I awaited delivery of the final cover drawing for Peter Galbert’s “Chairmaker’s Notebook.” Peter sent it overnight, and it was supposed to be here at noon.
By 2 p.m., I smelled a nasty stew. It was me. The package is still in Boston and we have lost a day. So I showered.
The good news was that I sneaked in 30 minutes in the shop to make the conical tenons for the next three-legged backstool. Deciding on the final shape was no contest. The six-sided legs look ridiculous – I’m going shave them into octagons as punishment. The octagonal legs look great. And the new seat sits remarkably well, even though it is unsaddled.
The second backstool for “The Furniture of Necessity” is going to be significantly different than the first three-legged example from last month.
I’ve slimmed the seat down and replaced its rounded shape with tapers and flat chamfers. Though there is still one curve at the rear that will mimic the crest’s curve.
The seat will be a bit lower than the first example, which was tall enough to sit at a modern dining table. This one is going to be a few inches lower so it will be suited for work by the fireplace, playing guitar or drinking a beer in the living room with friends.
The smushed hexagon legs. majQa’!
I’m experimenting with the legs. While the first backstool had tapered and shaved round legs, this one is going to have tapered octagons or (maybe) smushed hexagons. I have two sets of legs planed up at this point. The high-gravity hexagons looked good to me at first, but now I think they look a wee bit Klingon.
I’ll cut joinery for both and take some test photos before committing to a shape.
Finally, the crest is going to be a little lower to hit the sitter below the shoulder blades and condense the chair vertically a little more.
And now back to finishing up Peter Galbert’s “Chairmaker’s Notebook.” We will be taking pre-publication orders starting this week. As usual, all pre-publication orders will receive free domestic shipping.
Juggling a book and a furniture commission is like juggling two balls – pretty easy and not all that impressive. These last two weeks have been a full on circus: two books in overdrive (Peter Galbert’s “Chairmaker’s Notebook” and Don Williams’ “Virtuoso”) and two all-consuming projects, some three-legged chairs and a tool chest for Popular Woodworking Magazine.
The tool chest is a joint project between myself and Jameel Abraham at Benchcrafted. I built the box (the easy part) and he created a carved marquetry panel for the lid.
The chest itself is a new traveling design based on a bunch of old examples of chests I’ve studied and measured. After a lot of calculations, I found a chest size that will hold an impressive and nearly complete set of furniture-making tools in the minimum footprint. And it has nice lines and is a bit easier to build than an “Anarchist’s Tool Chest.”
I’m not giving up my floor chest. It is too much a part of the way I work. This smaller chest is going to be ideal for woodworkers who have limited floor space but want to hold a lot of tools that can all be accessed with one hand movement (just like the full-size chest). What’s the downside? There’s not a lot of room for moulding planes.
I’ll write up a full description of the chest’s inner workings and post a video on it when the sucker is done.
Jameel’s marquetry panel arrived about a week ago, but I haven’t had time to install it on the chest because I’ve been a slave to Adobe’s Creative Cloud software. But when I couldn’t stare at a screen anymore, I sneaked to the shop to install the hinges and attach the lid to the carcase.
The hardware is from blacksmith Peter Ross – Jameel and I decided to go whole-chicken on this project. I’m not going to show the lid here. That’s for the magazine’s editors to reveal. But you can see some glimpses of Jameel’s gorgeous work on the lid on his blog here.
The hinges are bolted through the lid and secured with square nuts. This is off-the-rack hardware, not from Peter Ross.Here is the Peter Ross chest hinge on the interior of the lid and carcase.
This morning I convinced the lid, carcase and hinges to work nicely together and released a huge sigh of relief. Now I just have to attach the dust seal to the lid. And add the crab lock. Paint the sucker. Attach the chest lifts. And write the article. No problem.
After three hours of 100-percent concentration on these hinges, I’m ready to work on something that has an “undo” button. Yeah, InDesign and Photoshop sound like a good idea.
Today I’ve been sketching a new seat for the three-legged backstool. Here’s where we are at 3:59 p.m. and ready for a beer after a long day of editing.
If you put your work out on display, you will receive criticism.
There’s the favorable: “Will you sell it to me?”
And the not-so-good: “Wow, that is a nice piece of oak you used.”
I’m used to it, and it doesn’t phase me. But I try not to let the comments of others color my own opinion – good or bad – of my work. I let my photographs do that. When I finish a prototype, it’s helpful to photograph the piece against a plain backdrop. No photographic lights, scrims, gridspots, filters or Photoshop. Just a camera set to f22 on a tripod and flat, overhead fluorescent shop lighting.
I pick a few stock vantage points and try to position the camera where viewers will stand. I take a half-dozen photos and look at them on screen and (more importantly) print them out so I can draw on the printouts.
Today I took a few minutes to record this backstool prototype. What do I see? The seat can be smaller and I’m going to futz with its D-shape a little. I’m happy with the crest rail. And the rake and splay of the legs works, functionally and visually. I’m still getting used to the fact that the chair has only three legs, but it’s sort of growing on me.
Anyone, the next iteration will have a smaller seat. Time to draw some new shapes on the printouts.
