Despite the heat, Katherine has made a new batch of soft wax and posted it in her etsy store.
She has fully mastered her new mixing/filling machine and was able to create this entire batch without any assistance during the bottling process. We all offered to help, but she stubbornly resisted (I don’t know where she gets that trait).
This is the last batch that will carry her current label, which she designed in 2016. She’s designed a snappy new label that we are getting printed. It’s amazing to me that she’s made more than 1,600 sales of almost 2,000 jars of wax since she started this business in high school.
Notes on the finish: This is the finish I use on my chairs. Katherine cooks it up here in the machine room using a waterless process. She then packages it in a tough glass jar with a metal screw-top lid. She applies her hand-designed label to each lid, boxes up the jars and ships them in a durable cardboard mailer. The money she makes from wax helps her make ends meet at college. Instructions for the wax are below. You can watch a video of how to use the wax here.
Instructions for Soft Wax 2.0
Soft Wax 2.0 is a safe finish for bare wood that is incredibly easy to apply and imparts a beautiful low luster to the wood.
The finish is made by cooking raw, organic linseed oil (from the flax plant) and combining it with cosmetics-grade beeswax and a small amount of a citrus-based solvent. The result is that this finish can be applied without special safety equipment, such as a respirator. The only safety caution is to dry the rags out flat you used to apply before throwing them away. (All linseed oil generates heat as it cures, and there is a small but real chance of the rags catching fire if they are bunched up while wet.)
Soft Wax 2.0 is an ideal finish for pieces that will be touched a lot, such as chairs, turned objects and spoons. The finish does not build a film, so the wood feels like wood – not plastic. Because of this, the wax does not provide a strong barrier against water or alcohol. If you use it on countertops or a kitchen table, you will need to touch it up every once in a while. Simply add a little more Soft Wax to a deteriorated finish and the repair is done – no stripping or additional chemicals needed.
Soft Wax 2.0 is not intended to be used over a film finish (such as lacquer, shellac or varnish). It is best used on bare wood. However, you can apply it over a porous finish, such as milk paint.
APPLICATION INSTRUCTIONS (VERY IMPORTANT): Applying Soft Wax 2.0 is so easy if you follow the simple instructions. On bare wood, apply a thin coat of soft wax using a rag, applicator pad, 3M gray pad or steel wool. Allow the finish to soak in about 15 minutes. Then, with a clean rag or towel, wipe the entire surface until it feels dry. Do not leave any excess finish on the surface. If you do leave some behind, the wood will get gummy and sticky.
The finish will be dry enough to use in a couple hours. After a couple weeks, the oil will be fully cured. After that, you can add a second coat (or not). A second coat will add more sheen and a little more protection to the wood.
Soft Wax 2.0 is made in small batches in Kentucky. Each glass jar contains 8 oz. of soft wax, enough for at least two chairs (probably four chairs).
8 thoughts on “More Soft Wax Now in Store”
I’m almost done with my jar of the version that used turpentine. I love the smell….any difference in finish quality between the turpentine and citrus versions?
Just the toxicity. I can’t see any real difference in how it works or looks.
I love this stuff I have been making tools and a few bowls(with an adz) love the finish. check them out at The country woodwright.
What’s the going rate to get Bean to appear in the advertising?
How does the consistency run compared to the commercial formulas? Is it more peanut butter or snot? I use Tried and True Original right now.
More like pnut butter
Comments are closed.