A Preview of ‘The Art of Joinery’

A 17th-century map of the world drawn by Joseph Moxon.

A 17th-century map of the world drawn by Joseph Moxon.

With our second edition of Joseph Moxon’s “The Art of Joinery” at the printer, I’ve had several e-mails from readers wondering why they should buy a 17th-century woodworking book written by a printer, globe-maker and hydrographer to the king.

Note that “woodworker” is not on Moxon’s CV.

Moxon is probably best known for his treatise on printing, but he also made Bibles, globes, mathematical instruments and theorized that the Arctic was free of ice – encouraging explorers to sail further north to find an open sea and the Northwest Passage. Even Capt. James Cook adopted Moxon’s wrong-headed theory.

In the woodworking world, Moxon is known for publishing the first English-language book on woodworking titled “The Art of Joinery,” which began in 1677 or 1678. His 14 small books on joinery, bricklaying, carpentry, turning and blacksmithing were combined into the now-famous “Mechanick Exercises.”

The book was not intended for joiners. They would have seen the book as superficial – an outsider’s view of the craft told with little detail and subtlety. Yet, “The Art of Joinery” is important – very important – because it is a snapshot of the tools and techniques among English joiners in the 17th century. And we have very few other sources as detailed as Moxon.

AOL_revised_webIn this book, you get an introduction to all the tools in a typical joiner’s kit, from the chisels to the hatchet. You get basic – and actually quite good – explanations of how to flatten a board from the rough, how to cut mortise-and-tenon joints and how to lay out and cut miters of all angles.

For me, it it always important to return to Moxon to understand what was important to the 17th-century joiner. Moxon spills tons of ink on the fore plane but says only a few lines about the smoothing plane. Moxon explains how joiners (and blacksmiths) would use coarse tools for as long as possible. He outlines a tool kit that is small and simple.

In other words, Moxon is the closest thing we have to a direct link to the joiners of the 17th century, where everything was made by hand.

For these reasons, we have chosen to republish “The Art of Joinery” in a format that makes it easy for you to digest, easy for you to understand and helps illustrate why what you are reading is important.

Our book is hardly a hagiography of Moxon. We challenge his observations and assumptions at every point. But we do acknowledge that Moxon is the real deal. His was a serious look at the handcrafts of Great Britain in the 17th century.

You can read all about our version of “The Art of Joinery” here in our store.

And to get a taste of what it is like to read, we’ve prepared a short excerpt that you can download. We are proud of every aspect of the book, from its manufacture to even the font we used for Moxon’s text.

You can download the excerpt in .pdf format here.


You can order “The Art of Joinery” for $21 with free domestic shipping by visiting our store here. Note that this free-shipping offer expires on Nov. 4.

The Art of Joinery” will ship to customers in early November.

— Christopher Schwarz

About Lost Art Press

Publisher of woodworking books and videos specializing in hand tool techniques.
This entry was posted in The Art of Joinery. Bookmark the permalink.

1 Response to A Preview of ‘The Art of Joinery’

  1. shavemaker says:

    Am I still allowed to buy this book – even if I live in what appears to be a vacuous and ragged looking void on Moxon’s map of the world? Love from Sydney Australia!


Comments are closed.