Want plans for a good Roorkhee chair? Look no further than the October 2012 issue of Popular Woodworking Magazine. My plans for a traditional Roorkhee Chair – leather and all – are there, along with construction notes and hardware details.
I have to give a huge thank you to Greg Miller in Australia, who helped guide me through the construction and design process of this incredible chair. My chair didn’t end up exactly like his, but I couldn’t have done it without him.
Some details:
— You can download the SketchUp drawing of the chair here.
— You can download the issue of the magazine here.
— Read more blog entries about Roorkhee chairs here.
The August 2012 issue of Popular Woodworking Magazine is in the mail to subscribers – I received mine yesterday – and it features my campaign secretary on the cover.
This fact failed to impress my children – even when the news was accompanied by a flirty little dance.
In any case, if you aren’t a subscriber, the issue will be on newsstands in a few weeks and the digital edition will be available for purchase and download on Saturday, June 30, at ShopWoodworking.com. The article that accompanies the project isn’t your typical Tab A into Slot B story. Yes, there is construction information in the article. But my goal was more to show you how to design one for yourself using the joinery, materials and typical dimensions of campaign chests.
Yeah, I know that’s kind of weird. But it’s the kick I’ve been on for a few years now. Plus, after 12 months, 14 days and 31 minutes after leaving my job, I can now let my freak flag fly.
However, I know that there are some woodworkers who would appreciate a very detailed drawing of the campaign secretary, and so I am offering it for a free download from the 3D Warehouse. It’s a SketchUp file, so you’ll need that free program to view and manipulate the file. Click here to download SketchUp (it’s free). Click here to download the file for the campaign secretary.
I’d also like to take a moment to answer the No. 1 question from readers who have studied the article and my photos: What the heck is that screw for on the side of the top drawer/gallery? Here’s a photo.
The screw shown in the photo is a temporary one – I replaced it with a nice No 10 brass screw after the finish was on. But what is it for? Simple, it holds the sides of the gallery to the desktop. Without the screw, the sides will flop about because they aren’t glued to anything except the back of the gallery.
Still confused?
OK, let’s back up a minute. The cubbyholes are a separate assembly that just slides into the gallery. Ignore them. Forget them. Here, in this illustration I’ve removed them.
What’s left? It’s a drawer without a drawer front. The sides are connected to the back with through-dovetails. The drawer bottom (i.e. the desktop) is in a groove in the sides. Here’s a shot of the drawer bottom in the groove in the sides.
The drawer bottom/desktop is connected to the sides with a single beefy screw through the side and into the bottom/desktop. We need this screw because the drawer front (which is the fall-front of the desk) is attached using hinges – not half-blind dovetails like a traditional drawer. And you can’t glue the bottom/desktop into the groove because it’s a wicked-bad cross-grain construction. So you need a screw.
If you build this project you will find out the solution for yourself, even if you don’t quite grasp it yet.
Just keep muttering to yourself: “I need two screws. I need two screws.” That will fix your problem – and make you some nice new friends at the grocery store.
The Roorkhee chair is like my Catholic spouse – everyone in town is a cousin, second cousin or great cousin.
Here’s a real interesting Roorkhee cousin: A gunsmith’s chair that is on the showroom floor of William Evans Ltd. in London. These photos were taken by Australian woodworker and blogger Glen Rundell.
Though the William Evans chair has a lot in common with the Roorkhee (wooden frame, leather seat, portability) it also has different bones. Instead of breaking apart, this chair folds up like a chair at a church picnic. It has a framed seat and back instead of a simple piece of loose leather. And I could go on about the bamboo turnings and arms.
But I won’t. Bottom line, the two forms have a lot of attributes in common.
This morning I mailed two Roorkhee chairs to customers on either side of the continent. It was a bit of a bittersweet job. I’m glad to have these chairs completed and out of the house. But the kids liked sitting in them, and I became enamored with them for some surprising reasons.
For one, they are damn comfortable – as comfy as a Morris chair. And they look good with our traditional/modernist furniture. But that’s not where my affection ends.
This week, my daughter Katy and I have been humping these chairs all over the city to photograph them – across parking lots, through parks and in and out of cars. I carried one of these chairs with one hand and while loaded with a complete photography and lighting rig. Even Katy was able to tote one of these chairs all day without any complaint – each chair weighs about 10 or 11 lbs.
And when it came time to pack them up to their final destinations, all the leather, brass and wood fit into a box measuring just 24” x 12” x 6”. With the packing material, the box weighed between 13 and 14 lbs. I could have packed them into an even smaller box if UPS had carried the right size.
Within a few minutes of packing up these chairs, I received two more orders for them.
I’m going to make only one more run of these chairs this year – I have books to edit, lay out and write. So if you want me to make one of these chairs for you, my recommendation is for your to make them for yourself. They are incredibly easy to construct, and my plans for them will be published in a fall issue of Popular Woodworking Magazine.
But if making them doesn’t interest you (bovine phobia?), here are the details for this last run of 2012:
• The chairs will be in genuine mahogany, finished with garnet shellac, just like the chairs shown above.
• All the hardware is solid brass or steel and aged to look vintage.
• On leather, I’ll offer a choice of colors for this run that ranges from the cognac color shown above to a rich black.
• The depth and width of the seat can be customized for you – the originals were quite narrow (about 16″ between the legs). The current run has about 17-1/2″ between the legs for “modern” hips. And I can go to about 19″ before engineering becomes an issue.
• The chairs are $750 each, delivered in the United States.
As a photographer, nothing makes me happier than a cloudy day.
Clouds are the world’s most effective, least expensive and least predictable diffusers. They mute shadows, mellow colors and reduce contrast. Why am I telling this to a bunch of woodworkers? Well, as a magazine editor I received hundreds of “print my article” submissions that featured a beautiful highboy in a grassy setting with full sun.
I know what these guys were thinking. Taking the photo outdoors allowed them to use a fast shutter speed and small aperture without a tripod. It also made the furniture look unnatural, like a wookie in a thong. All the details of their piece are hidden in shadow (actually a good thing with thonged wookie pics). All the corners are blown out in high relief.
If you take photos of your work, buy a tripod. Period. Buy a good one (look for used Italian ones on Craigslist). Get a shutter release cable for your camera. Use a medium aperture (like f8) and let the shutter go as slow as it wants. Some photos I take require a three-second shutter speed.
And, if you are going to shoot outside, make sure your project belongs outside (birdhouse, planter, punji stick trap for opossums) and wait for a cloudy day – or shoot at first light in the morning or at last light in the evening so the light is more diffuse.
Today I took some photos of my Roorkhee chairs before sending them out to their new homes. The photos in the morning were with full sun and were a disaster – I was trying to find some dappled shade. After dinner I went out under some full cloud cover and tried again.
