Katherine Schwarz and I spent some time this afternoon making a large order of soft wax 2.0 for her etsy store. It was the fastest and most consistent batch she has made since she started making wax several years ago.
After years of using homemade contraptions to heat and dispense the soft wax, we got serious. We now own a commercial mixer (designed for the cosmetics industry) that heats the ingredients to the correct temperature, blends them and allows us to easily dispense the soft wax into jars.
What usually took two days to do was completed in a couple hours.
The first batch made by our new mixer is now in her etsy store. More is to come. The machine worked so fast that we unexpectedly ran out of jars.
Notes on the finish: This is the finish I use on my chairs. Katherine cooks it up here in the machine room using a waterless process. She then packages it in a tough glass jar with a metal screw-top lid. She applies her hand-designed label to each lid, boxes up the jars and ships them in a durable cardboard mailer. The money she makes from wax helps her make ends meet at college. Instructions for the wax are below.
Instructions for Soft Wax 2.0
Soft Wax 2.0 is a safe finish for bare wood that is incredibly easy to apply and imparts a beautiful low luster to the wood.
The finish is made by cooking raw, organic linseed oil (from the flax plant) and combining it with cosmetics-grade beeswax and a small amount of a citrus-based solvent. The result is that this finish can be applied without special safety equipment, such as a respirator. The only safety caution is to dry the rags out flat you used to apply before throwing them away. (All linseed oil generates heat as it cures, and there is a small but real chance of the rags catching fire if they are bunched up while wet.)
Soft Wax 2.0 is an ideal finish for pieces that will be touched a lot, such as chairs, turned objects and spoons. The finish does not build a film, so the wood feels like wood – not plastic. Because of this, the wax does not provide a strong barrier against water or alcohol. If you use it on countertops or a kitchen table, you will need to touch it up every once in a while. Simply add a little more Soft Wax to a deteriorated finish and the repair is done – no stripping or additional chemicals needed.
Soft Wax 2.0 is not intended to be used over a film finish (such as lacquer, shellac or varnish). It is best used on bare wood. However, you can apply it over a porous finish, such as milk paint.
APPLICATION INSTRUCTIONS (VERY IMPORTANT): Applying Soft Wax 2.0 is so easy if you follow the simple instructions. On bare wood, apply a thin coat of soft wax using a rag, applicator pad, 3M gray pad or steel wool. Allow the finish to soak in about 15 minutes. Then, with a clean rag or towel, wipe the entire surface until it feels dry. Do not leave any excess finish on the surface. If you do leave some behind, the wood will get gummy and sticky.
The finish will be dry enough to use in a couple hours. After a couple weeks, the oil will be fully cured. After that, you can add a second coat (or not). A second coat will add more sheen and a little more protection to the wood.
Soft Wax 2.0 is made in small batches in Kentucky. Each glass jar contains 8 oz. of soft wax, enough for at least two chairs.
Oh, good! I bought one from the last batch and haven’t used it yet. I should save it as a collectible. Maybe put it on eBay… 😉
You’re a good father, Chris.
Businesses investing in new machinery like to maximize their outlay by using said machinery for the maximum number of hours. I’m curious what other products you might now make.
Normally, yes. But we are not normal.
Thanks to all the good spirits in all four directions for that!
I love that stuff
Would this be a good finish for a workbench?
I prefer to not use waxes on my workbenches. I use straight oil. Or nothing.
One question on use: does this wax fill in porous woods, e.g., oak, and will the excess in the pores cause the sticky/gummy issues you describe?
It will go into the pores, but it doesn’t have enough body to fill them like a hard wax. So it does not get sticky in porous woods.