I have never been so happy to hear from a roofer.
After 10 weeks of waiting for my number to come up, Brian the Roofer called to say his crew will begin the job Monday afternoon or Tuesday morning.
Barring rain or a visit from the Angel of Death, I’ll have a new roof by the end of the week and will then set up my machines. That should take a day at most. I don’t have a lot of machines, and they (with one exception) are easy to move.
The only thing left to do is install the mini-split to control the climate in the workshop. The wiring for it is ready – so it’s a one-day job. (And until the mini-split gets installed, I’ll simply freeze my butt off when I work.)
Ever since moving my workbench to the storefront almost two years ago, I’ve been slowed down by having two shops. Though I don’t do a lot of machine work, there were times that I had to drive home to use the drill press for a very particular hole and then had to drive right back to the storefront to continue working.
Though I don’t live far from the storefront (4.2 miles), the route always has a chance of jackknifed semis or cornholed motorists on the stretch that locals call “Death Hill.”
When I was planning out my new shop, I half-considered writing a series of articles about the process. Then I realized that I think most people make it a lot more difficult than necessary. And by putting a lot of effort into the shop, they actually make it more of a pain to use in the long-term.
If you’d like to read my brief thoughts on setting up shop, check out my entry at my other blog at Popular Woodworking Magazine. Here’s the link. (Side note: I’d like to offer a huge thank-you to all the people who read my blog there – the monthly pay I receive is an important part of our family budget. And according to the traffic numbers, 2017 was a good one for my blog there.)
Now back to dreaming of my membrane roof.
— Christopher Schwarz